OneSixthFigures

An online community to discuss and share news about sixth-scale figures, with an emphasis on either custom or commercial articulated figures.


You are not connected. Please login or register

Painting seamless bodies

Go to page : Previous  1, 2, 3, 4  Next

Go down  Message [Page 2 of 4]

41Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Jul 17, 2018 4:30 pm

GubernatorFan

GubernatorFan
Founding Father
Thank you, Ephiane! You made it all possible after sharing your discovery.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

42Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Fri Jul 20, 2018 3:48 am

Really impressive results with the oil pastels, and thanks all for being so descriptive about the techniques. Tempted to try this on a spare white M34 Death Dealer body. I’m curious to know about the stability over time both in terms of colour and any material deterioration. Oil and some types of silicone don’t mix. For example, oil is often used as a destabiliser for silicone sealant to remove it. Some silicones are more oil resistant. No idea what Phicen’s recipe is though!

View user profile

43Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Fri Jul 20, 2018 9:42 am

GubernatorFan

GubernatorFan
Founding Father
MarkEl wrote: I’m curious to know about the stability over time both in terms of colour and any material deterioration.  Oil and some types of silicone don’t mix.  For example, oil is often used as a destabiliser for silicone sealant to remove it.  Some silicones are more oil resistant.  No idea what Phicen’s recipe is though!

Ephiane and others can answer this better than me. The African body repaint is only a few days old. My original experiment (on the de-skeletalized M31 body) is a few weeks (actually almost two months) older than that, and no real issues yet. The only minor/tangent issue is that (given my typical lack of patience) I need to do more smoothing with the makeup sponge or maybe more rinsing before applying the protective powder, as there is a tiny amount of pastel transferring on tight clothing. The body does not become discolored, and I have noticed no issues with its silicon surface.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

44Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Fri Jul 20, 2018 5:33 pm

The oil pastels are on my Figures for months now and the phichen skin is in excellent condition. On the green body i used nail polish remover, very aggressiv stuff. I do this because i want the body in his old color for a another bash. no way, it´s still green ... but the effect is it looks more shiny now.

Don´t know what kind of silicon phichen used, but i´m sure they will not tell us Very Happy

View user profile

45Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sun Jul 22, 2018 2:44 pm

Now I'm going to have to give oil pastels a try. I've been avoiding it out of fear. I'm still using chalk pastels, which takes longer on a M34. does anyone use shu uemara oil products to remove stains?

View user profile

46Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sun Jul 22, 2018 4:07 pm

Damn GubernatorFan, that came out great. Since as of now TBL has only done that one thin AA body, I feel like this pastel trick is going to be the way to go for a while still, not to mention more exotic colors I'm sure will still be needed for fantasy and scifi figures. And seeing that Tyson head on the M30 body, he looks intense as hell.


_________________
www.reverendspooky.com
View user profile http://reverendspooky.com

47Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sun Jul 22, 2018 5:46 pm

GubernatorFan

GubernatorFan
Founding Father
ReverendSpooky wrote:Damn GubernatorFan, that came out great.  Since as of now TBL has only done that one thin AA body, I feel like this pastel trick is going to be the way to go for a while still, not to mention more exotic colors I'm sure will still be needed for fantasy and scifi figures.  And seeing that Tyson head on the M30 body, he looks intense as hell.

Thank you, ReverendSpooky! The pastel trick does seem to be working pretty well. One limitation is that these pastels don't quite mix like normal paints, and there isn't much choice with the browns, at least from the several brands I have seen. The Mike Tyson heads work well with this, and here's another, Soldier Story's Jamie Foxx head, that works reasonably well (though not quite as well). The Wesley Snipes and John Boyega heads are too dark for this.

Painting seamless bodies - Page 2 Jamief10


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

48Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Wed Aug 01, 2018 2:51 pm

GubernatorFan

GubernatorFan
Founding Father
So I picked up one of those cool Michael Rooker/Yondu heads (just couldn't resist the excellent craftsmanship). And of course it could only be used for that one character. So I couldn't help myself coloring another M30 with oil pastels. This time it was very difficult to reach an acceptably close match (with several layers of different blues and purples), but it ended up decent enough...

Painting seamless bodies - Page 2 Yondu010

Painting seamless bodies - Page 2 Yondu012

Painting seamless bodies - Page 2 Yondu011

For more of the makeshift Yondu (and friends), see HERE.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

49Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Thu Aug 02, 2018 6:44 am

Fantastic ! You really mastered the oil pastel job . I planed so many bashes, but can´t finish anything. For the Blue phichen body i planed to make a female Star Wars Twilek. Maybe this is a Inspriation for You ?

Painting seamless bodies - Page 2 Aayla-10


View user profile

50Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Thu Aug 02, 2018 9:10 am

GubernatorFan

GubernatorFan
Founding Father
Thanks for the encouragement, Ephiane. That image does look pretty sweet. And it is inspiring, though it would necessitate the creation of the Twilek ears (or whatever those things on the back of the head are). I could sculpt them, but I'd much prefer some soft and bendable material, and that is currently beyond my know-how. So far, I've been mostly experimenting with your technique of painting the bodies with oil pastels (thanks again), and even this wasn't intended as a truly specific and full kitbash as much as an experiment, even if inspired by the very specific head sculpt. But maybe one day...
So there are both blue and green Twileks? I thought Oona (spelling?) was green. Ah, the wonders of an expanded universe (oops... "legends"). Still, probably more fun than some of the recent Star Wars movies and the whole fan vs director and studio executive controversy Smile


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

51Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Thu Aug 02, 2018 10:17 am

I could have sworn I posted on this yesterday, but...I reckon something went sideways.

Anyhow, I think the match to the sculpt is pretty damn good. Overall, the shading is very even, not splotchy. That's what impresses me the most.

Mighty fine experimental work. Hell, might fine finish work, in my book.

View user profile

52Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Thu Aug 02, 2018 11:09 am

Damn, I think you got a great color match!!! Really impressive, and he looks perfect.

And Yondu looks totally ready for the Guardians of the Galaxy pinup calendar here:

Painting seamless bodies - Page 2 Yondu012


_________________
www.reverendspooky.com
View user profile http://reverendspooky.com

53Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Thu Aug 02, 2018 11:54 am

GubernatorFan

GubernatorFan
Founding Father
dadrab wrote:I think the match to the sculpt is pretty damn good. Overall, the shading is very even, not splotchy. That's what impresses me the most.
Mighty fine experimental work. Hell, mighty fine finish work, in my book.

Thank you very much, dadrab! I think some of that "perfection" is a side effect of having to do extra layers when I decided he was looking too blue or too purple and went over it again with a different pastel. There are a couple of spots (especially the wrist ends of the lower arms) where I should probably do a bit more before I put it away.

ReverendSpooky wrote:Damn, I think you got a great color match!!!  Really impressive, and he looks perfect.  And Yondu looks totally ready for the Guardians of the Galaxy pinup calendar

Thank you very much, ReverendSpooky. I didn't try to do any kind of special surface patterning (scars or tattoos -- then again I don't remember seeing any in the film, and I was far more concerned about getting a decent color match overall), but I'm glad you too find it acceptable. And yes, that particular photo was inspired by that sort of stuff -- tongue in cheek, of course.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

54Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Thu Aug 02, 2018 12:10 pm

Stryker2011

Stryker2011
Founding Father
Pretty amazing coloring on that Yondu body.


_________________
Mark

He who dies with the most toys wins!

Painting seamless bodies - Page 2 TCFITBi
View user profile

55Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Fri Aug 03, 2018 7:10 pm

GubernatorFan

GubernatorFan
Founding Father
Thank you, Stryker!


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

56Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Wed Aug 08, 2018 3:48 am

Well done on the Yondu figure GubFan. The blue match looks well blended to me. Really cool results.

View user profile

57Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Wed Aug 08, 2018 10:55 am

GubernatorFan

GubernatorFan
Founding Father
MarkEl wrote:Well done on the Yondu figure GubFan.  The blue match looks well blended to me.  Really cool results.  

Thank you very much, Mark! The experimentation continues, I might be able to post on a new, darker African body in a few moments.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

58Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Wed Aug 08, 2018 1:11 pm

GubernatorFan

GubernatorFan
Founding Father
I just completed (more or less) another oil pastel on a TBLeague/Phicen silicone body. I was trying to match the skin tone on the HT Finn head. The challenge was in part because oil pastels tend to come with very limited brown options, and of course are not as blendable as conventional paints (not only is oil pastel blendability somewhat limited, but it also varies from product to product, or so I read). I think I got pretty close with several coats of brown, red, blue, green, and more brown, although the protective powder dulled the color a little bit, detracting from the closeness of the match (the head is a bit warmer in tone). The relative shininess of the head sculpt also detracts from that closeness in the photos. This time matching the hands and feet painted with acrylics to the body was easier. At any rate, I was able to make a darker African body, which I might retouch in future, when more oil pastels arrive.

Here it is, first by itself, then compared to the first attempt (with a different Mike Tyson head than before). Let me know what you think and if you have helpful suggestions.

Painting seamless bodies - Page 2 Finn0110

Painting seamless bodies - Page 2 Finn0210

Painting seamless bodies - Page 2 Finn0310


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

59Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sat Aug 25, 2018 3:49 am

Great Work on the Fighters, Gubernator!  I insert one of the Swamptroll Pics here, because she has a Painted seamless body and shows what is possible with a pichen body Laughing
For example, the Barbarian Guy next to the Troll has the same Body like her.

Painting seamless bodies - Page 2 P1200217

View user profile

60Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sun Aug 26, 2018 2:00 pm

GubernatorFan

GubernatorFan
Founding Father
Thank you, Ephiane! And thank you again for teaching us the oil pastel trick and continuing to exhibit ever more complex work, like your troll. It is almost impossible to imagine that her body is a modified version of the barbarian next to her, what with the ankle and wrist extensions, and the built-up chest and shoulders.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

61Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Aug 28, 2018 12:09 pm

Damn GubernatorFan, you really did a hell of a good job matching those head sculpts. You mentioned the issue with the noticeable difference in texture, but I think that's something we deal with on all plastic heads on rubber bodies. It's just that much more apparent to you since you're the one doing it.

Ephiane, I'm still completely awed by that troll body. Seeing her next to the barbarian just makes it all the more apparent how complete that transformation is. Inspiring work as always.


_________________
www.reverendspooky.com
View user profile http://reverendspooky.com

62Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Aug 28, 2018 1:33 pm

GubernatorFan

GubernatorFan
Founding Father
ReverendSpooky wrote:Damn, GubernatorFan, you really did a hell of a good job matching those head sculpts.  You mentioned the issue with the noticeable difference in texture, but I think that's something we deal with on all plastic heads on rubber bodies.  It's just that much more apparent to you since you're the one doing it.

Thank you very much, ReverendSpooky! In some earlier posts in this thread, Ephiane has actually outlined a technique to make the silicone surface a bit shinier, which might actually help in cases like these.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

63Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Aug 28, 2018 1:45 pm

GubernatorFan wrote:
ReverendSpooky wrote:Damn, GubernatorFan, you really did a hell of a good job matching those head sculpts.  You mentioned the issue with the noticeable difference in texture, but I think that's something we deal with on all plastic heads on rubber bodies.  It's just that much more apparent to you since you're the one doing it.

Thank you very much, ReverendSpooky! In some earlier posts in this thread, Ephiane has actually outlined a technique to make the silicone surface a bit shinier, which might actually help in cases like these.

Oh, I remember! I'm itching to take a crack at it myself, but haven't had the right project yet. Still, quite inspired by all your success.

View user profile http://reverendspooky.com

64Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Aug 28, 2018 2:57 pm

GubernatorFan

GubernatorFan
Founding Father
ReverendSpooky wrote:Oh, I remember!  I'm itching to take a crack at it myself, but haven't had the right project yet.  Still, quite inspired by all your success.

I've picked up a few more African heads for the painted bodies, Muhammad Ali and Will Smith among them.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

65Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sat Jan 12, 2019 6:08 pm

These are all amazing! Gives me hope for some of my planned SW 'alien' customs. Smile

Not sure I'd have the courage to try this on a tbleague until I was able to get the technique right. Does anyone know if the oil pastels would work on something that was partially seamless, like the PopToys bodies? I am trying to avoid having to resort to using fabric dye, if possible...

That reminds me, is the technique for using the chalk pastels similar to that of applying the oil pastels, or do you have to grind them up and apply them with a brush or something? I think I would prefer the more dusty look of chalk, but do the chalk pastels have more of a risk of staining, marking, or transferring colour to clothes/accessories/ one's hands/other figures? I like to handle my figures a lot, which is one of the reasons I haven't tried anything like this yet, I feared it would be too messy...

And GubernatorFan - What kind of powder are you using to 'set' the oil pastels?


_________________
"The happy ending of the fairy tale, the myth, and the divine comedy of the soul, is to be read,
not as a contradiction, but as a transcendence of the universal tragedy of man."

Focusing on the Prequels, Clone Wars, and Original Trilogy eras (NO 'sequels', thanks!)
View user profile https://the-far-bright-center.tumblr.com/

66Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sat Jan 12, 2019 8:23 pm

GubernatorFan

GubernatorFan
Founding Father
skywalkersaga wrote:These are all amazing! Gives me hope for some of my planned SW 'alien' customs. Smile

That reminds me, is the technique for using the chalk pastels similar to that of applying the oil pastels, or do you have to grind them up and apply them with a brush or something? ... I like to handle my figures a lot, which is one of the reasons I haven't tried anything like this yet, I feared it would be too messy...

And GubernatorFan - What kind of powder are you using to 'set' the oil pastels?

Thank you very much. Ephiane invented the technique, I simply ran with it. Smile You list the exact reason I didn't try to apply chalk powder instead. It seemed too impermanent and transferable to me. I don't know that you have to use anything to "set" the oil pastels -- just rub them down a lot with a make-up sponge, until you notice they do not transfer on (say) a test piece of fabric or paper towel. I do use silicone finishing powder (NYX Professional Makeup Studio Finishing Powder Translucent Finish) because I would do so on the seamless bodies after washing them anyway (and you would have washed them to remove the protective powder before applying the oil pastels in the first place), but I am not certain if it is actually necessary after the silicone surface has been covered with the oil pastel. I figure, better safe than sorry. By the way, you could use starch or baby powder just as well.

The above works for the silicone flesh used by Phicen/TBLeague. Jiaou uses a different rubbery flesh, although in theory it works pretty much the same way, so we're guessing the above would apply. Similarly with other rubbery seamless coverings, but they might all be something else, so you might stumble upon something that defies the technique.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

67Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sun Jan 13, 2019 2:30 pm

GubernatorFan wrote: [...] I don't know that you have to use anything to "set" the oil pastels -- just rub them down a lot with a make-up sponge, until you notice they do not transfer on (say) a test piece of fabric or paper towel. I do use silicone finishing powder (NYX Professional Makeup Studio Finishing Powder Translucent Finish) because I would do so on the seamless bodies after washing them anyway (and you would have washed them to remove the protective powder before applying the oil pastels in the first place), but I am not certain if it is actually necessary after the silicone surface has been covered with the oil pastel. I figure, better safe than sorry. By the way, you could use starch or baby powder just as well.

The above works for the silicone flesh used by Phicen/TBLeague. Jiaou uses a different rubbery flesh, although in theory it works pretty much the same way, so we're guessing the above would apply. Similarly with other rubbery seamless coverings, but they might all be something else, so you might stumble upon something that defies the technique.

Ahh, ok, I understand. I was confused and thought the powder was for the oil pastels, but it's for the actual body itself and is akin to you would use anyway to add to the surface so it doesn't get too 'sticky', is that right?

I will bear in mind the potential differences between the silicone , jiaou type material, and the 'partially seamless' (rubber?) body coverings. I have no idea what the PopToys covering is made of, but I'll try to see if I can find out how effective the oil technique is on it (if it even works at all).

Another question: has anyone attempted to use ink-based, permanent watercolours on these kinds of bodies? Ether the silicone or on other types of rubber?

And finally, I saw that you'd tried permanent marker on the Jiaou experiment. I'm curious if one could colour an entire body, or even just the visible portions of it with a permanent marker? I'd even settle for being able to colour just (parts of) the rubber torso  on jointed bodies that way. (I'm trying to do anything and everything to avoid having to do the 'immersion in fabric dye' method, lol.)


_________________
"The happy ending of the fairy tale, the myth, and the divine comedy of the soul, is to be read,
not as a contradiction, but as a transcendence of the universal tragedy of man."

Focusing on the Prequels, Clone Wars, and Original Trilogy eras (NO 'sequels', thanks!)
View user profile https://the-far-bright-center.tumblr.com/

68Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sun Jan 13, 2019 3:39 pm

GubernatorFan

GubernatorFan
Founding Father
skywalkersaga wrote:Ahh, ok, I understand. I was confused and thought the powder was for the oil pastels, but it's for the actual body itself and is akin to you would use anyway to add to the surface so it doesn't get too 'sticky', is that right?

Correct. I suppose I thought the finishing powder might lessen any potential chance that the oil pastel might transfer, but the primary motivation was that it is supposed to be applied to the silicone surface to keep it from getting sticky.

skywalkersaga wrote: I will bear in mind the potential differences between the silicone , jiaou type material, and the 'partially seamless' (rubber?) body coverings. I have no idea what the PopToys covering is made of, but I'll try to see if I can find out how effective the oil technique is on it (if it even works at all).

Just checked it again (didn't want to get the acronym wrong): Jiaou's rubbery flesh is supposedly TPE (Thermoplastic elastomer, of which there are apparently different kinds).

skywalkersaga wrote: Another question: has anyone attempted to use ink-based, permanent watercolours on these kinds of bodies? Ether the silicone or on other types of rubber?

I haven't tried watercolor, but I doubt it will work. Acrylic paint did not.

skywalkersaga wrote: And finally, I saw that you'd tried permanent marker on the Jiaou experiment. I'm curious if one could colour an entire body, or even just the visible portions of it with a permanent marker? I'd even settle for being able to colour just (parts of) the rubber torso  on jointed bodies that way. (I'm trying to do anything and everything to avoid having to do the 'immersion in fabric dye' method, lol.)

What I tried wasn't a normal permanent marker (like a Sharpie) but acrylic marker (by Molotow, admittedly that is also supposedly permanent), on a Jiaou body. For smaller details (like tattoos) on areas that are not subject to much stretching (i.e., not joints) it might work well enough. At the joints, when they are stretched/bent, you see cracks or gaps on the stretched-out part of the surface. Your question about the permanent marker comes down to whether the permanent marker can in effect cause a permanent stain on the surface that will not rub off or be absorbed and fade away. I suspect it will not flake or have gaps like the acrylic, but apart from that I don't know whether it would be successful. I have moved since my experiments and my experimental subjects were either tossed or temporarily misplaced, so I can't do a quick TBLeague or Jiaou check.

I understand and share your reluctance to use the "immersion in fabric dye" method -- apparently results are usually uneven, require multiple immersions, and are accompanied by infernal stench. That's why I went with the oil pastel, which is apparently both easy and successful, at least on the Phicen/TBLeague silicone bodies. Other complicated methods include silicone paint (which requires mixable dyes, a respirator mask and other equipment), or (for small details and a removable solution) mixing silicone paint (like silc pig) with silicone glue. I used this for painting unpainted nipples on the silicone bodies. The result was quite decent, but if you wanted to undo it, you could scrape/rub it off the underlying silicone surface.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

69Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Sun Jan 13, 2019 4:19 pm

Thank you for all the clarifications, GubernatorFan. You are likely right that watercolour will not work, but my reason for thinking *permanent* watercolour might have a chance of staining it is that it's ink-based, and I was sort of thinking that maybe it would have a similar effect as the fabric dye, but I'm probably totally off on that. :p

And thanks also for the clarification re: the markers. I have a jointed body that I am hoping to colour (as well as some potential seamless ones), but it has a rubber torso which I has been proving an issue.  I was thinking to just paint the hard plastic limbs with Vallejo acrylics, and then use a permanent marker on the areas of the torso that will be showing (the upper body, neck, shoulders, etc). But maybe this is a ridiculous idea. If so, then colouring the jointed bodies without resorting to fabric dye will prove just as challenging if not even moreso than the seamless ones. I will try to experiment with the permanent marker idea, just in case...

This thread has at least given me hope for the seamless bodies, and may mean I'll even be able to use that smaller s27b type body (albeit for a different character than I'd original planned) after all. : )


_________________
"The happy ending of the fairy tale, the myth, and the divine comedy of the soul, is to be read,
not as a contradiction, but as a transcendence of the universal tragedy of man."

Focusing on the Prequels, Clone Wars, and Original Trilogy eras (NO 'sequels', thanks!)
View user profile https://the-far-bright-center.tumblr.com/

70Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Jan 15, 2019 8:08 am

Another question for GubernatorFan, and apologies if it is a daft one, but... does the Nyx finishing powder 'transfer' at all onto hands , gloves, or other figures (when handling a 'painted' seamless figure I mean)? I realize that the whole point of it is to 'finish' the makeup so it doesn't smudge, but does the powder *itself* rub off onto other things?


_________________
"The happy ending of the fairy tale, the myth, and the divine comedy of the soul, is to be read,
not as a contradiction, but as a transcendence of the universal tragedy of man."

Focusing on the Prequels, Clone Wars, and Original Trilogy eras (NO 'sequels', thanks!)
View user profile https://the-far-bright-center.tumblr.com/

71Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Jan 15, 2019 11:39 am

GubernatorFan

GubernatorFan
Founding Father
skywalkersaga wrote:Another question for GubernatorFan, and apologies if it is a daft one, but... does the  Nyx finishing powder 'transfer' at all onto hands , gloves, or other figures (when handling a 'painted' seamless figure I mean)? I realize that the whole point of it is to 'finish' the makeup so it doesn't smudge, but does the powder *itself* rub off onto other things?

No, not after you have rubbed/brushed it onto the body (you will know you have done that when it basically blends in). It certainly doesn't damage anything, except your chances at flash photography (if you use flash, you will end up seeing chalky areas all over your figure -- or your own skin if you use it on yourself -- but there isn't much you can do about that). Remember to get the translucent version of the powder.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

72Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Jan 15, 2019 1:26 pm

GubernatorFan wrote:

No, not after you have rubbed/brushed it onto the body (you will know you have done that when it basically blends in). It certainly doesn't damage anything, except your chances at flash photography (if you use flash, you will end up seeing chalky areas all over your figure -- or your own skin if you use it on yourself -- but there isn't much you can do about that). Remember to get the translucent version of the powder.

Ah, gotcha -- thanks for 'clearing' that up for me. ;D


_________________
"The happy ending of the fairy tale, the myth, and the divine comedy of the soul, is to be read,
not as a contradiction, but as a transcendence of the universal tragedy of man."

Focusing on the Prequels, Clone Wars, and Original Trilogy eras (NO 'sequels', thanks!)
View user profile https://the-far-bright-center.tumblr.com/

73Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Jan 15, 2019 2:06 pm

Oh wait, @Ephiane , is your "fool" a Mr. Been head?  LOL LOve it!

Man, I'm inspired to do this now, though messing with such an expensive body scares me, LOL.  However, on the other hand, sometimes I do see stained bodies up for sale, and I'd think that wouldn't be a problem!... I'm curious if anyone tried this with chalk pastels, as I have a ton of those.  They're more desirable for using on resin.  @Gubernator you say you use a protective powder, and I see that stuff up for sale, but I'd like to know if baby powder is just as good?  I got a lot of that on hand Smile

Oh, nevermind, I see you use translucent powder, which I presume would keep it from looking weirdly powdery and chalky Smile

Anyways, this info is golden!

View user profile

74Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Jan 15, 2019 2:21 pm

GubernatorFan

GubernatorFan
Founding Father
Peaches wrote:Gubernator you say you use a protective powder, and I see that stuff up for sale, but I'd like to know if baby powder is just as good?  I got a lot of that on hand Smile Oh, nevermind, I see you use translucent powder, which I presume would keep it from looking weirdly powdery and chalky Smile

You're welcome. The translucent finishing powder is only chalky IF you happen to have some of it not sufficiently absorbed into the silicone surface (often hard to tell) WHEN you take a photograph WITH a flash. Otherwise, in normal light and non-flash photography it does not appear chalky at all. According to everything I have heard, talcum powder and baby powder and even starch are supposed to do the trick (of protecting the silicone surface) just as well.


_________________
I'll be back!
View user profile http://onesixthfigures.forumotion.com

75Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Mon Jan 21, 2019 6:09 pm

Update: can confirm that permanent marker (alcohol-based) most definitely does NOT work on the rubber torsos on the regular jointed bodies. Have just attempted (on an already-damaged PopToys body), and all it did was bleed onto the limbs and then rub off the rubber, which leaves me back to square one.

It's pretty much what I expected, but I had to rule it out for myself just in case.

At this point it seems like colouring a seamless body is actually EASIER than trying to stain, paint, or dye a rubber-torso'ed, jointed one... O.o


_________________
"The happy ending of the fairy tale, the myth, and the divine comedy of the soul, is to be read,
not as a contradiction, but as a transcendence of the universal tragedy of man."

Focusing on the Prequels, Clone Wars, and Original Trilogy eras (NO 'sequels', thanks!)
View user profile https://the-far-bright-center.tumblr.com/

76Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Mon Jan 21, 2019 6:33 pm

Stryker2011

Stryker2011
Founding Father
Skywalkersaga, if you’re doing a SW alien, do you need to use a female body that has any rubber at all? Or can you use one that is all plastic? Are exposed joints an issue? Or will they be covered?


_________________
Mark

He who dies with the most toys wins!

Painting seamless bodies - Page 2 TCFITBi
View user profile

77Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Mon Jan 21, 2019 7:09 pm

Yeah, no it's not necessary that it's a rubber torso.  Most of the time I'm not particular about whether my bodies are jointed, hard plastic, rubber, seamless, doll-bodies....as long as they are the right *height* and the overall effect looks like the character, I'm pretty easy going about it. : )

Now, at the moment I have a number of in-progress and/or planned figures, and many of them are indeed female SW aliens.  But because I already have several extra bodies, most of which have rubber torsos, on-hand (ones that didn't work out for the non-alien projects, lol), I've been trying to use what I had, before buying even more.

So, yes, for most of these figures, I have planned the outfits strategically so that that the rubber areas won't show, and all I will have to paint are the harder plastic limbs. For one of them -- a younger character -- I have even been planning to use an Obitsu doll body, as it is all hard plastic and easier to paint the right colour.

BUT, there is one particular (version of a) character that I would really like to do that not only has an outfit that shows skin in the 'rubber' areas, but which also needs to be a particular height next to some of the other characters, and this is where it has been getting tricky for me. Because I have yet to find an 'all hard plastic' body that is the right height *and* body shape/bust-size/stature. This is why I had been trying to make the PopToys body work, as it met that criteria ...the only problem being that I had not realized at the time that I was planning it all out that rubber was almost impossible to 'paint'.

But, after reading this thread, I realized that I had been under an erroneous impression that seamless tbleague bodies and the regular rubber jointed bodies were all just as hard as each other to colour. I now see that , given the success of Ephiane's method, it seems that it's the latter that are more difficult, and which I'd have to resort to fabric dye to colour....something I'm not prepared to do at this stage.  

So, I am thinking that I may have to use a tbleague body for the above-mentioned project after all. But again, I'd need to have it in-hand to check next to the other figures to make sure it's the right height before proceeding. I'm definitely considering it, but first I was just trying to be thorough, especially since I've already had so many disappointments and I'm tired of buying bodies that don't work. I know it's all part of the hobby, but it's getting rather disheartening (and expensive) .... ;p


_________________
"The happy ending of the fairy tale, the myth, and the divine comedy of the soul, is to be read,
not as a contradiction, but as a transcendence of the universal tragedy of man."

Focusing on the Prequels, Clone Wars, and Original Trilogy eras (NO 'sequels', thanks!)
View user profile https://the-far-bright-center.tumblr.com/

78Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Mon Jan 21, 2019 8:01 pm

Stryker2011

Stryker2011
Founding Father
Yeah, unfortunately, that’s the thing with this hobby. Trial and error gets to be VERY expensive, but that is pretty much the only way to do this. Tips and advice can only go so far. I have yet to attempt this body painting technique on a TBLeague body again (I tried it once, and it was an absolute disaster). I’d actually like to see a video tutorial on how folks have done this correctly.


_________________
Mark

He who dies with the most toys wins!

Painting seamless bodies - Page 2 TCFITBi
View user profile

79Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Mon Jan 21, 2019 8:07 pm

Stryker2011 wrote:Yeah, unfortunately, that’s the thing with this hobby. Trial and error gets to be VERY expensive, but that is pretty much the only way to do this. Tips and advice can only go so far. I have yet to attempt this body painting technique on a TBLeague body again (I tried it once, and it was an absolute disaster). I’d actually like to see a video tutorial on how folks have done this correctly.

Yeah, I understand, and have realized that. At least I'm able to use the extra bodies for some other figures, so they're not totally wasted purchases. If anything, this hobby is forcing me to be more creative and resourceful, which is the good kind of challenge. : )  I'm sure I'll figure something out -- was really just sharing my (lack of) results in case anyone else was daft stubborn enough to try it for themselves too. ;D

And I completely agree, it would be helpful to see the full process for the oil pastel (or even regular pastel!) technique(s)....


_________________
"The happy ending of the fairy tale, the myth, and the divine comedy of the soul, is to be read,
not as a contradiction, but as a transcendence of the universal tragedy of man."

Focusing on the Prequels, Clone Wars, and Original Trilogy eras (NO 'sequels', thanks!)
View user profile https://the-far-bright-center.tumblr.com/

80Painting seamless bodies - Page 2 Empty Re: Painting seamless bodies on Tue Jan 22, 2019 12:04 pm

Apologies for spamming the thread, but I have some questions regarding *modifying* seamless bodies (not painting-related). I searched, but couldn't find a thread dedicated to that specifically -- should I start a new one, or is there already a space for discussing it somewhere that I missed? I just wanted to ask before going too far off-topic here...


_________________
"The happy ending of the fairy tale, the myth, and the divine comedy of the soul, is to be read,
not as a contradiction, but as a transcendence of the universal tragedy of man."

Focusing on the Prequels, Clone Wars, and Original Trilogy eras (NO 'sequels', thanks!)
View user profile https://the-far-bright-center.tumblr.com/

Sponsored content


Back to top  Message [Page 2 of 4]

Go to page : Previous  1, 2, 3, 4  Next

Permissions in this forum:
You cannot reply to topics in this forum