OneSixthFigures

An online community to discuss and share news about sixth-scale figures, with an emphasis on either custom or commercial articulated figures.


You are not connected. Please login or register

OneSixthFigures » Advanced Search

Go to page : 1, 2  Next

Search found 38 matches for startrek

Estimate delivery date: 3rd Quarter 2024
1:6 Scale Articulated Figure
$195.00 + $25 flat rate international shipping per figure

"I PREFER TO CONFRONT MORTALITY, RATHER THAN HIDE FROM IT”
Introducing the EXO-6 Dr. Julian Bashir 1/6 Scale Museum Quality Figure - a meticulously crafted tribute to one of Star Trek's most beloved characters. As the chief medical officer aboard Deep Space 9, Dr. Julian Bashir's charm, intelligence, and unwavering commitment to the well-being of his fellow crew members have made him an iconic figure in the Star Trek universe. Now, you can bring the essence of this remarkable character into your collection with our exquisite 1/6 scale figure, capturing every detail of Bashir's distinctive features and Starfleet uniform.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 12 inches tall, no detail was spared in reproducing his outfit and accessories as authentically as possible.

Crafted with a keen eye for detail, this figure stands at 12 inches tall and features over 30 points of articulation, allowing you to pose Dr. Bashir in a multitude of lifelike positions. The included accessories, such as his medical tricorder and hypo spray, further enhance the figure's authenticity, bringing to life those memorable moments from Star Trek: Deep Space Nine.

The EXO-6 Doctor Bashir 1:6 Scale Articulated Figure includes:
Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Realistic Portrait: The portrait sculpt of Alexander Siddig as Julian Bashir is beautifully sculpted with an authentic likeness. It is specially hand-painted.
Starfleet Duty Uniform: Meticulously researched, this duty uniform matches the pattern and color of the original costume as seen from season 5 on, recreated in sixth scale. Lieutenant pips are permanently attached to the collar and a non-removeable DS9 com badge is affixed to the chest. Magnets are sewn into the jumpsuit so the holsters for the tricorder and phaser can be attached.
Boots: Soft plastic boots sculpted to match the cut and style of the original footwear.
Hands: A total of seven interchangeable hands are included so he can be displayed holding his accessories.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Autograph card: An informational card that can be used to get an autograph from the performer and displayed with your figure.
Equipment
Lt. Bashir is outfitted with everything needed for a Star Fleet medical officer. He comes equipped with:

Type II hand phaser. The phaser can be worn in a black holster that magnetically attaches to his jumpsuit.
Hypospray: Includes 3 differently colored vials.
Medical Tricorder: This tricorder includes a removeable scanner that fits in the back of the tricorder. It can be folded up and worn in a holster.
PADD (Personal Access Display Device): the data display device used onboard Deep Space 9.
EXO-6's commitment to the variety and number of characters in Star Trek is unparalleled. Never before and never again will fans be able to own such high-end collectible figures covering such a wide expanse of the Star Trek universe. Act now to ensure you have the ultimate Star Trek collectibles before they disappear, never to return.



Height:

12 in

30 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

TM & © 2024 CBS Studios Inc. Star Trek and related marks and logos are trademarks of CBS Studios Inc. All Rights Reserved.

©EXO-6 All Rights Reserved.

Topics tagged under startrek on OneSixthFigures 1_webp23
Topics tagged under startrek on OneSixthFigures 2_webp22
Topics tagged under startrek on OneSixthFigures 3_webp24
Topics tagged under startrek on OneSixthFigures 4_webp21
Topics tagged under startrek on OneSixthFigures 5_webp22
Topics tagged under startrek on OneSixthFigures 6_webp22
Topics tagged under startrek on OneSixthFigures 7_webp23
Topics tagged under startrek on OneSixthFigures 8_webp21
Topics tagged under startrek on OneSixthFigures 9_webp20
Topics tagged under startrek on OneSixthFigures 10_web21


#newproduct #Exo-6 #StarTrek #DeepSpaceNine #DoctorJulianBashir #male #TV #Sci-Fi
Star Trek: Voyager
Neelix
PRE-ORDER END DATE: FEB 27, 2024
ESTIMATE DELIVERY DATE: 3RD QUARTER 2024
1:6 Scale Articulated Figure
“THERE’S MORE TO LIFE THAN SCAVENGING FOR FOOD AND HIDING FROM ENEMIES. YOU HAVE TO LIVE A LITTLE, TOO.”
Talaxian Neelix joined the Voyager crew when the ship was drawn half a galaxy away from home and became their guide, chef and chief morale officer. The ever-ebullient alien was a cheerful foil to the super serious Tuvok and despite an ability to annoy anyone turned into a beloved character for Voyager crew and fans alike.

This 1:6-scale figure re-creates this memorable character in exquisite 1:6 detail. Standing approximately 11.5 inches tall, every element, from the asymmetrical Talaxian tunic to his galley accessories are authentically reproduced. The original portrait sculpt of Ethan Phillips as Neelix has an authentic, hand-painted likeness

The EXO-6 Neelix 1:6 Scale Articulated Figure includes:
Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 28 cm tall.
Realistic Portrait: Neelix’s portrait is lovingly rendered by top artists, with an excellent likeness of Ethan Phillips in full makeup. Each head sculpt is specially hand-painted.
Talaxian outfit: Meticulously researched, Neelix’s colorful blue costume recreates how he was dressed in many significant episodes including his final farewell. The print was reconstructed from best sources and reproduced as accurately as possible. An authentically scaled communicator badge is permanently affixed to the tunic.
Shoes: Soft plastic shoes sculpted to match the cut and style of the original series footwear.
Hands: A total of seven interchangeable hands are included so he can be displayed holding the various accessories.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Autograph card: An informational LCARS card that can used to get an autograph from the performer and displayed with your figure.
Equipment
Neelix is equipped with:

Coffee pot: So the Captain can always have her favorite beverage at hand.
Cooking ladle: for serving up that famous Talaxian stew.
PADD (Personal Access Display Device): the data display device used onboard Voyager.
Whether you're a dedicated Star Trek enthusiast or a collector of finely crafted figures, the 1/6 scale Neelix Museum Grade figure offers an unparalleled opportunity to own a piece of Star Trek history. With its attention to detail, screen-accurate accessories, and versatile posing options, this figure is a must-have for any fan of the franchise and a true celebration of this remarkable character.

Height:

11 in

28 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures Neelix10
Topics tagged under startrek on OneSixthFigures Neelix12
Topics tagged under startrek on OneSixthFigures Neelix11
Topics tagged under startrek on OneSixthFigures Neelix15
Topics tagged under startrek on OneSixthFigures Neelix14
Topics tagged under startrek on OneSixthFigures Neelix13
Topics tagged under startrek on OneSixthFigures Neelix16
Topics tagged under startrek on OneSixthFigures Neelix18
Topics tagged under startrek on OneSixthFigures Neelix17
Topics tagged under startrek on OneSixthFigures Neelix19
Topics tagged under startrek on OneSixthFigures Neelix20


#newproduct #Exo-6 #StarTrek #Voyager #Neelix #male #Sci-Fi #TV
Star Trek: The Next Generation
LT. COMMANDER GEORDI LA FORGE - ESSENTIAL VERSION (LESS STUFF)

PRE-ORDER END DATE: FEB 12, 2024
Estimate delivery date: 2nd Quarter 2024
1:6 Scale Articulated Figure
$190.00 + $25 flat rate international shipping per figure
“I'VE ALWAYS THOUGHT THAT TECHNOLOGY COULD SOLVE ALMOST ANY PROBLEM. IT ENHANCES THE QUALITY OF OUR LIVES, LETS US TRAVEL ACROSS THE GALAXY - EVEN GAVE ME MY VISION - BUT SOMETIMES YOU JUST HAVE TO TURN IT ALL OFF.”




Lt. Commander Geordi La Forge was Chief Engineer of the USS Enterprise D and an integral part of the crew from Star Trek: The Next Generation. Although blind from birth Geordi could see multiple bands of the electromagnetic spectrum using a cybernetic visor.

Thanks to a masterful performance by LeVar Burton, La Forge became one of the most beloved characters in Star Trek: The Next Generation. Burton brought a vulnerability to the expert engineer that endeared him to audiences everywhere.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 11.25 inches tall, every element, from his 24th century tunic to his custom black boots, is authentically reproduced. The original portrait sculpt of LeVar Burton as Geordi has an authentic, hand-painted likeness.

The EXO-6 Geordi La Forge 1:6 Scale Articulated Figure includes:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 28 cm tall.
Realistic Portrait: Sculpted by top artists, this is a faithful likeness of LeVar Burton in his role as Geordi and is specially hand-painted. The visor is removeable.
Starfleet Duty Uniform: Meticulously researched, this duty uniform matches the pattern and color of the original costume recreated in 1:6 scale. Magnets are sewn into the uniform so the holsters for the tricorder and phaser can be attached. An authentically scaled communicator badge is permanently affixed to the tunic.
Boots: Soft plastic boots sculpted to match the cut and style of the original movie footwear.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Multiple hands for holding accessories and various poses.
Left and right relaxed hands.
Left hand for the tricorder.
Right hand for the phaser.


Accessories

Lt. Commander La Forge is outfitted with everything needed for a Star Fleet officer. He comes equipped with:

Type II hand phaser. The phaser can be worn in a black holster that magnetically attaches to the pants.
TR-580 Tricorder VII: This standard tricorder can be opened or worn in a holster.
This fine collectible figure is an excellent rendition of everyone’s favorite engineer and a great addition to your EXO-6 Star Trek™: The Next Generation 1:6-scale figure collection.



Height:

11.8 in

30 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures Geordi11
Topics tagged under startrek on OneSixthFigures Geordi12
Topics tagged under startrek on OneSixthFigures Geordi10
Topics tagged under startrek on OneSixthFigures Geordi14
Topics tagged under startrek on OneSixthFigures Geordi13
Topics tagged under startrek on OneSixthFigures Geordi15
Topics tagged under startrek on OneSixthFigures Geordi16


Star Trek: The Next Generation
LT. COMMANDER GEORDI LA FORGE (STANDARD VERSION) (MORE STUFF)

PRE-ORDER END DATE: FEB 12, 2024
Estimate delivery date: 2nd Quarter 2024
1:6 Scale Articulated Figure
$230.00 + $25 flat rate international shipping per figure
“I'VE ALWAYS THOUGHT THAT TECHNOLOGY COULD SOLVE ALMOST ANY PROBLEM. IT ENHANCES THE QUALITY OF OUR LIVES, LETS US TRAVEL ACROSS THE GALAXY - EVEN GAVE ME MY VISION - BUT SOMETIMES YOU JUST HAVE TO TURN IT ALL OFF.”


Lt. Commander Geordi La Forge was Chief Engineer of the USS Enterprise D and an integral part of the crew from Star Trek: The Next Generation. Although blind from birth Geordi could see multiple bands of the electromagnetic spectrum using a cybernetic visor.

Thanks to a masterful performance by LeVar Burton, La Forge became one of the most beloved characters in Star Trek: The Next Generation. Burton brought a vulnerability to the expert engineer that endeared him to audiences everywhere.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 11.25 inches tall, every element, from his 24th century tunic to his custom black boots, is authentically reproduced. The original portrait sculpt of LeVar Burton as Geordi has an authentic, hand-painted likeness.

The EXO-6 Geordi La Forge 1:6 Scale Articulated Figure includes:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 28 cm tall.
Realistic Portrait: Sculpted by top artists, this is a faithful likeness of LeVar Burton in his role as Geordi and is specially hand-painted. The visor is removeable.
Starfleet Duty Uniform: Meticulously researched, this duty uniform matches the pattern and color of the original costume recreated in 1:6 scale. Magnets are sewn into the uniform so the holsters for the tricorder and phaser can be attached. An authentically scaled communicator badge is permanently affixed to the tunic.
Boots: Soft plastic boots sculpted to match the cut and style of the original movie footwear.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Multiple hands for holding accessories and various poses.
Left and right relaxed hands.
Left and right fist hands.
Left hand for the tricorder.
Right hand for the phaser or engineering tools .
Com badge hand.
Clasped hands to recreate his iconic pose.


Accessories

Lt. Commander La Forge is outfitted with everything needed for a Star Fleet officer. He comes equipped with:

Type II hand phaser. The phaser can be worn in a black holster that magnetically attaches to the pants.
TR-580 Tricorder VII: This standard tricorder can be opened or worn in a holster.
Personal Access Display Device (PADD).
Engineering tool kit featuring an opening case and 3 tools – an ODN recoupler, interphasic coil spanner, and ODN Scanner.
This fine collectible figure is an excellent rendition of everyone’s favorite engineer and a great addition to your EXO-6 Star Trek™: The Next Generation 1:6-scale figure collection.


Topics tagged under startrek on OneSixthFigures Geordi19
Topics tagged under startrek on OneSixthFigures Geordi17
Topics tagged under startrek on OneSixthFigures Geordi18
Topics tagged under startrek on OneSixthFigures Geordi21
Topics tagged under startrek on OneSixthFigures Geordi20
Topics tagged under startrek on OneSixthFigures Geordi22
Topics tagged under startrek on OneSixthFigures Geordi24
Topics tagged under startrek on OneSixthFigures Geordi23
Topics tagged under startrek on OneSixthFigures Geordi25
Topics tagged under startrek on OneSixthFigures Geordi26
Topics tagged under startrek on OneSixthFigures Geordi27


#newproduct #EXO-6 #StarTrek #NextGeneration #LtCmdrGeordiLaForge #male #sci-fi #TV

NEW PRODUCT: Hiya Toys - Kirk (ESS0265) - Tue Jan 02, 2024 7:41 am

We are proud to announce EXQUISITE SUPER Series 1/12 scale James T. Kirk action figure from Star Trek 2009.
On the day of James T. Kirk’s birth, his father dies on his damaged starship in a last stand against a Romulan mining vessel looking for Ambassador. 25 years later, challenged Captain Christopher Pike to realize his potential in Starfleet. The USS Enterprise is crewed with promising cadets. This crew will have an adventure in the final frontier where the old legend is altered forever as a new version of the legend begins.

This brand-new James T. Kirk action figure stands at 160mm tall and faithfully reproduces his appearance from Star Trek 2009. He is dressed in the iconic yellow uniform with Starfleet emblem representing command and strategic personnel. The clothes, jeans and belts are all made from real cloth, ensuring both superior poseability and aesthetic appeal. The communicator, phaser pistol, voice logger, Whiskey Flask, and other accessories are all finely detailed.
With a highly posable body and interchangeable parts, allowing you to recreate various dynamic action poses from the movie. A special stand for this series is also included, featuring a black base adorned with the Star Trek logo, fully immersing you in the ambiance of the Star Trek universe.

Packing List:
Kirk Figure x1.
Replacement hand type x8.
Replacement head type x2.
Handheld Communicator x1.
Phase Gun x 1, Phase Gun x 1, Phase Gun x 1
Belt x1,
Apple x1,
Wine Bottle x1,
Mini-Ship Model x1.
Logger x1

Estimated release in — Q3(July~September),2024

Topics tagged under startrek on OneSixthFigures 01123
Topics tagged under startrek on OneSixthFigures 02122
Topics tagged under startrek on OneSixthFigures 03118
Topics tagged under startrek on OneSixthFigures 04119
Topics tagged under startrek on OneSixthFigures 05116
Topics tagged under startrek on OneSixthFigures 06116
Topics tagged under startrek on OneSixthFigures 07114
Topics tagged under startrek on OneSixthFigures 08112
Topics tagged under startrek on OneSixthFigures 09108
Topics tagged under startrek on OneSixthFigures 10208
Topics tagged under startrek on OneSixthFigures 11200
Topics tagged under startrek on OneSixthFigures 12196


#HiyaToys #Kirk #StarTrek
Search in: NON-SIXTH-SCALE ACTION FIGURES  Topic: NEW PRODUCT: Hiya Toys - Kirk (ESS0265)  Replies: 6  Views: 162
“RECONCILING MY DIVERGENT CULTURES OF ORIGIN IS COMPLEX. THE JOURNEY IS CHALLENGING.”
One of the most intriguing characters in all of Star Trek is the half-Vulcan/half-human Spock. In the newest series, Star Trek: Strange New Worlds, Spock is a young lieutenant, learning about himself and his place in the galaxy. Masterfully portrayed by Ethan Peck, this Spock is trying new things including laughter, love and living life on the edge.

This 1:6-scale figure re-creates young Spock in exquisite 1:6 detail. Standing approximately 12 inches tall, every element, from his Star Fleet uniform to his uniquely styled boots, is authentically reproduced. The original portrait sculpt of Ethan Peck has an authentic, hand-painted likeness.

The EXO-6 Spock 1:6 Scale Articulated Figure includes:
Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Realistic Portrait: Lovingly rendered by a top artist, this excellent likeness of Ethan Peck as Spock is specially hand-painted.
Star Fleet Duty Uniform: With access to the original costumes, this uniform has been meticulously reproduced from the original full-size outfit. Tiny raised printing covers the shoulder and arms just like in the original outfit. A black t-shirt is worn under the Starfleet tunic. An authentically scaled badge is permanently affixed to the shirt.
Boots: Plastic boots sculpted to match the cut and style of the original footwear.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Equipment
Spock comes with the Star Fleet equipment needed for exploring strange new worlds. He comes equipped with:

Federation Type II phaser with removable Type 1 phaser.
Belt and phaser holster.
Flip screen communicator.
Federation phaser rifle.
Tricorder with opening door and shoulder strap.
Multiple hands for posing with the appropriate accessories.
This fine collectible figure is a perfect rendition of the typically stoic Mr. Spock and an excellent addition to your Star Trek: Strange New Worlds collection.

EXO-6's commitment to the variety and number of characters in Star Trek is unparalleled. Never before and never again will fans be able to own such high-end collectible figures covering such a wide expanse of the Star Trek universe. Act now to ensure you have the ultimate Star Trek collectibles before they disappear, never to return.



Height:

12 in

30 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures 1_webp20
Topics tagged under startrek on OneSixthFigures 2_webp19
Topics tagged under startrek on OneSixthFigures 3_webp21
Topics tagged under startrek on OneSixthFigures 4123
Topics tagged under startrek on OneSixthFigures 5_webp19
Topics tagged under startrek on OneSixthFigures 6_webp19
Topics tagged under startrek on OneSixthFigures 7_webp20
Topics tagged under startrek on OneSixthFigures 8_webp18


#newproduct #Exo-6 #StarTrek #StrangeNewWorlds #LieutenantSpock #male #Sci-Fi
"JUST BECAUSE WE DON'T UNDERSTAND A LIFE FORM DOESN'T MEAN THAT WE CAN DESTROY IT."


The mysterious Odo was a shapeshifter who had been recruited by the Cardassians as the only law officer on the space station Terek Nor, which later became Deep Space 9. Odo remained the Constable when the Federation took over and worked closely with Commander Sisko and Bajoran Major Kira to keep things running smoothly on the station. Later it was revealed that Odo was one of the all-powerful Founders who ruled the Gamma Quadrant with an iron fist. His conflict between his ties to his friends on Deep Space 9 and his need to know where he came from was one of the more compelling plotlines of Star Trek: Deep Space Nine.

Odo is now the latest in EXO-6’s DS9 collection and is outfitted in his later seasons’ Bajoran security uniform. As a shapeshifter Odo must return to liquid form once a day and the bucket he used also comes with the figure. A half transformed Odo in his liquid state also accompanies the figure as well as a PADD, tricorder and multiple hands.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 11.5 inches tall, no detail was spared in reproducing his outfit and accessories as authentically as possible. The original portrait of Rene Auberjonois as Odo is expertly sculpted with an accurate likeness to the actor in full make-up.

The EXO-6 Constable Odo 1:6 Scale Articulated Figure includes:
Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Realistic Portrait: The portrait sculpt of Rene Auberjonois as Odo is beautifully sculpted based on the make-up from the series. It is specially hand-painted.
Bajoran Security uniform: The collared outfit matches Odo’s look from Season 3 through 7. A Bajoran communicator badge is permanently affixed to the tunic. A removable belt is included.
Boots: His boots are sculpted to match the style of the original footwear.
TR-590 Tricorder X: This standard Starfleet tricorder which is held closed and open by a magnet.
PADD (Personal Access Display Device): the data display device used onboard Deep Space 9
Special Accessories:
Bajoran bucket: The pail used by Odo to rest in his liquid form.
Shape-shifting Odo: A gold, translucent, half-transformed Odo.
This fine collectible figure is a perfect representation of your favorite Founder and a great addition to your EXO-6 Star Trek™ 1:6-scale figure collection.

EXO-6's commitment to the variety and number of characters in Star Trek is unparalleled. Never before and never again will fans be able to own such high-end collectible figures covering such a wide expanse of the Star Trek universe. Act now to ensure you have the ultimate Star Trek collectibles before they disappear, never to return.

Height:

11.5 in

30 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

TM & © 2023 CBS Studios Inc. Star Trek and related marks and logos are trademarks of CBS Studios Inc. All Rights Reserved.

©EXO-6 All Rights Reserved.


Topics tagged under startrek on OneSixthFigures 1_webp19
Topics tagged under startrek on OneSixthFigures 2_webp18
Topics tagged under startrek on OneSixthFigures 3_webp20
Topics tagged under startrek on OneSixthFigures 4_webp18
Topics tagged under startrek on OneSixthFigures 5_webp18
Topics tagged under startrek on OneSixthFigures 6_webp18
Topics tagged under startrek on OneSixthFigures 7_webp19


#newproduct #Exo-6 #StarTrek #DeepSpaceNine #ConstableOdo #male #TV #Sci-Fi
“THE FUTURE IS WHAT WE MAKE IT. SO, GO TO WAR WITH EACH OTHER, OR JOIN OUR FEDERATION OF PLANETS AND REACH FOR THE STARS. THE CHOICE IS YOURS.”
Star Trek: Strange New World is the newest iteration of Star Trek and has become a fan favorite in just two seasons. Following a pre-Kirk Enterprise in a five-year mission, the Captain is Christopher Pike, an experienced and level-headed officer who knows his own dark future. Portrayed by Anson Mount, Pike has quickly become a fan favorite character who leads a diverse and entertaining crew.

This 1:6-scale figure re-creates Captain Pike in exquisite 1:6 detail. Standing approximately 12 inches tall, every element, from his Star Fleet uniform to his uniquely styled boots, is authentically reproduced. The original portrait sculpt of Anson Mount has an authentic, hand-painted likeness.

The EXO-6 Pike 1:6 Scale Articulated Figure includes:
Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Realistic Portrait: Lovingly rendered by a top artist, this excellent likeness of Anson Mount as Christopher Pike is specially hand-painted.
Star Fleet Duty Uniform: With access to the original costumes, this uniform has been meticulously reproduced from the original full-size outfit. An authentically scaled badge is permanently affixed to the shirt.
Boots: Plastic boots sculpted to match the cut and style of the original footwear.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Equipment
PIke comes with the Star Fleet equipment needed for exploring strange new worlds. He comes equipped with:

Federation Type II phaser with removable Type 1 phaser.
Belt and phaser holster.
Flip screen communicator.
Federation phaser rifle.
Multiple hands for posing with the appropriate accessories.
This fine collectible figure is a perfect rendition of the respected Captain Pike and an excellent way to start your Star Trek: Strange New Worlds collection.

EXO-6's commitment to the variety and number of characters in Star Trek is unparalleled. Never before and never again will fans be able to own such high-end collectible figures covering such a wide expanse of the Star Trek universe. Act now to ensure you have the ultimate Star Trek collectibles before they disappear, never to return.



Height:

12 in

30 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures 1_webp18
Topics tagged under startrek on OneSixthFigures 2_webp17
Topics tagged under startrek on OneSixthFigures 3_webp19
Topics tagged under startrek on OneSixthFigures 4_webp17
Topics tagged under startrek on OneSixthFigures 5_webp17
Topics tagged under startrek on OneSixthFigures 6_webp17
Topics tagged under startrek on OneSixthFigures 7_webp18
Topics tagged under startrek on OneSixthFigures 8_webp17
Topics tagged under startrek on OneSixthFigures 9_webp17
Topics tagged under startrek on OneSixthFigures 10_web17
Topics tagged under startrek on OneSixthFigures 11_web16
Topics tagged under startrek on OneSixthFigures 12_web15
Topics tagged under startrek on OneSixthFigures 13_web15


#newproduct #Exo-6 #StarTrek #StrangeNewWorlds #CaptainChristopherPike #male #Sci-Fi
"It may be the warriors who get the glory, but it's the engineers who build societies."


Half human, half Klingon B’Elanna Torres fought for the rebel Maquis before being integrated into the Voyager crew when they were transported half a galaxy away to the Delta Quadrant. B’Lanna fought to keep her Klingon side in check while proving herself worthy as the chief engineer for Voyager.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 10.5 inches tall, every element, from her 24th century jumpsuit to her Starfleet boots, is authentically reproduced. The original portrait sculpt of Roxann Dawson as Torres has an authentic, hand-painted likeness.

THE EXO-6 B’ELANNA TORRES 1:6 SCALE ARTICULATED FIGURE INCLUDES:
Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 28 cm tall.
Realistic Portrait: Torres’ portrait is lovingly rendered by top artists, with an excellent likeness of Roxann Dawson. Each head sculpt is specially hand-painted.
Starfleet Duty Uniform Jumpsuit: Meticulously researched, this duty uniform matches the pattern, and color of the original costume recreated in 1:6 scale. Magnets are sewn into the uniform so the holsters for the tricorder and phaser can be attached. An authentically scaled communicator badge is permanently affixed to the tunic.
Boots: Soft plastic boots sculpted to match the cut and style of the original series footwear.
Hands: A total of six interchangeable hands are included so he can be displayed holding the various accessories.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Autograph card: An informational LCARS card that can used to get an autograph from the performer and displayed with your figure.
EQUIPMENT
B’Elanna is outfitted with everything needed for a member of Voyager’s crew. She comes equipped with:

Type II hand phaser. The phaser can be worn in a black holster that magnetically attaches to the jumpsuit.
TR-590 Tricorder X: This standard tricorder can be opened or worn in a holster.
PADD (Personal Access Display Device): the data display device used onboard Voyager.
Whether you're a dedicated Star Trek enthusiast or a collector of finely crafted figures, the 1/6 scale B'Elanna Torres Museum Grade figure offers an unparalleled opportunity to own a piece of Star Trek history. With its attention to detail, screen-accurate accessories, and versatile posing options, this figure is a must-have for any fan of the franchise and a true celebration of this remarkable character.

Height:

10.5 in

28 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures 1_webp14
Topics tagged under startrek on OneSixthFigures 2_webp14
Topics tagged under startrek on OneSixthFigures 3_webp14
Topics tagged under startrek on OneSixthFigures 4_webp14
Topics tagged under startrek on OneSixthFigures 5_webp14
Topics tagged under startrek on OneSixthFigures 6_webp14
Topics tagged under startrek on OneSixthFigures 7_webp14
Topics tagged under startrek on OneSixthFigures 8_webp14
Topics tagged under startrek on OneSixthFigures 9_webp14
Topics tagged under startrek on OneSixthFigures 10_web14


#newproduct #Exo-6 #StarTrek #Voyager #LieutenantB'ElannaTorres #female #Sci-Fi #TV
TWOK Lt JG Saavik, Kobayashi Maru Edition

Star Trek: The Wrath of Khan
Lt JG Saavik - Kobayashi Maru Edition
PRE-ORDER END DATE: OCT 8, 2023
Estimate delivery date: 2nd Quarter 2024
1:6 Scale Articulated Figure
$200.00

“I do not believe this was a fair test of my command abilities.... there was no way to win.”

The EXO-6 Star Trek: The Wrath of Khan collection figures pays tribute to one of the most significant and beloved films in the Star Trek franchise. Released in 1982, Star Trek II: The Wrath of Khan not only renewed the fanbase, but it also laid the foundation for countless future iterations and expanded the universe in remarkable ways. The EXO-6 collection captures the essence and gravity of this groundbreaking film, allowing fans to relive the thrilling moments and immerse themselves in the rich tapestry of Star Trek lore.

The figures in this collection faithfully replicate the standard duty “Monster Maroon” uniforms used in the film, capturing even the smallest details in 1/6 scale. The “Monster Maroon” uniforms were the popular militaristic style uniform created for this film, but which endured for the next five films.

The first figure in the line is the young Vulcan Saavik, introduced in Star Trek: The Wrath of Khan. Embodied by newcomer Kirstie Alley, the fresh-faced Starfleet cadet brought a new vitality to the franchise and gave younger fans a relatable character. EXO-6 is bringing Saavik out in two different versions.

The budget conscious Kobayashi Maru Edition presents her as first seen in the movie, on a training exercise in command of the Enterprise. The Kobayashi Maru exercise itself holds significant importance in the Star Trek storyline, as it is referenced throughout various iterations of the franchise.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 11 inches tall, every element, from her 23rd century tunic to her custom black boots, is authentically reproduced.

This EXO-6 Saavik 1:6 Scale Articulated Figure was designed for the budget conscious Star Trek fans, the Kobayashi Maru version includes:

Newly developed fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 28 cm tall. She has relaxed hands useful for a variety of poses.
A Realistic Portrait: Lovingly rendered by a top artist, the head sculpt is an excellent original portrait of Kirstie Alley as Saavik with an authentic, hand-painted likeness.
Starfleet “Monster Maroon” Duty Uniform: Meticulously researched, this duty uniform matches the pattern, and color of the original costume recreated in 1:6 scale. Diecast pieces make up various accents on the uniform including the main chest badge.
Boots: Soft plastic boots sculpted to match the cut and style of the original movie footwear.
Display Base: A hexagonal plain black display.
Immerse yourself in the rich lore of Star Trek: The Wrath of Khan and bring the enigmatic Lt. Saavik to life in your collection. Whether you choose the Kobayashi Maru version or the Regula One version with additional accessories, this figure is a must-have for any Star Trek enthusiast. Embrace the logic and calm demeanor of this beloved Vulcan officer and let her presence grace your display.

Note: This collectible figure is recommended for ages 15 and above. It is a meticulously crafted item meant for display purposes and not intended for play.

Height:

11 in (28 cm)

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures 1_webp13
Topics tagged under startrek on OneSixthFigures 2_webp13
Topics tagged under startrek on OneSixthFigures 3_webp13
Topics tagged under startrek on OneSixthFigures 4_webp13
Topics tagged under startrek on OneSixthFigures 5_webp13
Topics tagged under startrek on OneSixthFigures 6_webp13
Topics tagged under startrek on OneSixthFigures 7_webp13


TWOK Lt JG Saavik, Regula One Edition

Star Trek: The Wrath of Khan
Lt JG Saavik - Regula One Edition
PRE-ORDER END DATE: OCT 8, 2023
Estimate delivery date: 2nd Quarter 2024
1:6 Scale Articulated Figure
$270.00

Kirk : I changed the conditions of the test; got a commendation for original thinking. I don't like to lose.
Saavik : Then you never faced that situation... faced death.
The EXO-6 Star Trek: The Wrath of Khan collection figures pays tribute to one of the most significant and beloved films in the Star Trek franchise. Released in 1982, Star Trek II: The Wrath of Khan not only renewed the fanbase, but it also laid the foundation for countless future iterations and expanded the universe in remarkable ways. The EXO-6 collection captures the essence and gravity of this groundbreaking film, allowing fans to relive the thrilling moments and immerse themselves in the rich tapestry of Star Trek lore.

The figures in this collection faithfully replicate the standard duty “Monster Maroon” uniforms used in the film, capturing even the smallest details in 1/6 scale. The “Monster Maroon” uniforms were the popular militaristic style uniform created for this film, but which endured for the next five films.

The first figure in the line is the young Vulcan Saavik, introduced in Star Trek: The Wrath of Khan. Embodied by newcomer Kirstie Alley, the fresh-faced Starfleet cadet brought a new vitality to the franchise and gave younger fans a relatable character. EXO-6 is bringing Saavik out in two different versions.

The Regula One Edition offers two distinct looks from her appearances in the movie-- from her training mission in command of the Enterprise, to the landing party beamed down to Regula One in search of the Genesis device. The “Monster Maroon” tunic can be removed and replaced with the elaborate and detailed away jacket. It’s worth noting that recreating this iconic jacket has proven to be challenging for many, but EXO-6 has managed to replicate it in 1/6 scale with the utmost precision and detail. The Regula One version also includes accessories to complete her look while investigating the research station.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 11 inches tall, every element, from her 23rd century tunic to her custom black boots, is authentically reproduced.

This version of Saavik was designed for the die-hard Star Trek fan, the Regular One version includes:

Newly developed Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 28 cm tall.
A Realistic Portrait: Lovingly rendered by a top artist, the head sculpt is an excellent original portrait of Kirstie Alley as Saavik with an authentic, hand-painted likeness.
Starfleet “Monster Maroon” Duty Uniform: Meticulously researched, this duty uniform with removeable tunic matches the pattern, and color of the original costume recreated in 1:6 scale. Diecast pieces make up various accents on the uniform including the main chest badge.
Starfleet Field Jacket: The most complex and detailed piece of Star Trek costuming ever created, this field jacket was worn by Saavik and other crew members when they beamed off the Enterprise to investigate the disappearance of the Genesis device. It features opening pockets, diecast parts and a working zipper.
Boots: Soft plastic boots sculpted to match the cut and style of the original movie footwear.
Display Base: A sculpted hexagonal display base representing the Enterprise refit transporter was specifically created for The Wrath of Khan characters.
Equipment

Heavy Duty Treicorder: Only seen in The Wrath of Khan this version of the tricorder is a large scanner used by Saavik on Regula One. A strap allows her to hang it from her shoulder.
Phaser: Hand phaser can be carried in the side pocket of the field jacket.
Communicator: A new style of communicator with flip top antenna grid, only seen in Wrath of Khan.
Multiple hands: Including the Live Long and Prosper gesture, and hands shaped to hold her accessories.
Immerse yourself in the rich lore of Star Trek: The Wrath of Khan and bring the enigmatic Lt. Saavik to life in your collection. Whether you choose the Kobayashi Maru version or the Regula One version with additional accessories, this figure is a must-have for any Star Trek enthusiast. Embrace the logic and calm demeanor of this beloved Vulcan officer and let her presence grace your display.

Note: This collectible figure is recommended for ages 15 and above. It is a meticulously crafted item meant for display purposes and not intended for play.



Height:

11 in

28 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures 8_webp13
Topics tagged under startrek on OneSixthFigures 9_webp13
Topics tagged under startrek on OneSixthFigures 10_web13
Topics tagged under startrek on OneSixthFigures 11_web13
Topics tagged under startrek on OneSixthFigures 12_web12
Topics tagged under startrek on OneSixthFigures 13_web12
Topics tagged under startrek on OneSixthFigures 14_web12


#newproduct #Exo-6 #StarTrek #TheWrathOfKhan #LtJGSaavik #KobayashiMaru #RegulaOne #female #movie #Sci-Fi
Star Trek: Picard
Admiral (ret.) Jean-Luc Picard
PRE-ORDER END DATE: SEPT 30, 2023
Estimate delivery date: 4th Quarter 2023
1:6 Scale Articulated Figure
US $190.00 + $25 flat rate international shipping per figure
“WHAT BEGAN OVER 35 YEARS AGO ENDS TONIGHT.”
The oft-praised Season 3 of Star Trek: Picard is represented here in 1:6 form by EXO-6’s Jean-Luc Picard one sixth scale museum grade collectible figure.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 11 inches tall, every element, from his 24th century jacket to his custom black boots, is authentically reproduced. The original portrait sculpt of Patrick Stewart has an authentic, hand-painted likeness.

The EXO-6 Picard 1:6 Scale Articulated Figure includes:
Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 28 cm tall.
Realistic Portrait: Lovingly rendered by a top artist, this excellent likeness of Patrick Stewart as jean-Luc Picard is specially hand-painted.
24th Century Outfit: With research assisted by Costume Designer Michael Crow, this clothing set matches the onscreen costume as seen in Star Trek: Picard Season 3. Including the jacket, pants and trousers – all matched to the original costume. An authentically scaled communicator badge is permanently affixed to the jacket.
Boots: Plastic boots sculpted to match the cut and style of the original footwear.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Equipment
Picard comes with appropriate hand props as seen in the show. He comes equipped with:

Federation hand phaser.
Bottle of Chateau Picard (not for consumption).
This fine collectible figure is a perfect rendition of everyone’s favorite retired admiral and an excellent way to commemorate Season 3 of Star Trek: Picard. Many thanks to showrunner Terry Matalas, Costume Designer Michael Crow and Prop Master Jeffrey Lombardi for their invaluable help in realizing the characters of Star Trek: Picard.



Height:

11 in

28 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

Topics tagged under startrek on OneSixthFigures 1_webp12
Topics tagged under startrek on OneSixthFigures 2_webp12
Topics tagged under startrek on OneSixthFigures 3_webp12
Topics tagged under startrek on OneSixthFigures 4_webp12
Topics tagged under startrek on OneSixthFigures 5_webp12
Topics tagged under startrek on OneSixthFigures 6_webp12
Topics tagged under startrek on OneSixthFigures 7_webp12
Topics tagged under startrek on OneSixthFigures 8_webp12
Topics tagged under startrek on OneSixthFigures 9_webp12


#newproduct #Exo-6 #StarTrek #Picard #AdmiralJean-LucPicard #male #App-Series #Sci-Fi
Star Trek: Deep Space Nine
MAJOR KIRA NERYS
PRE-ORDER END DATE: AUGUST 8, 2023
Estimate delivery date:  4th Quarter  2023
1:6 Scale Articulated Figure
$215.00 USD
"I AM JUST A BAJORAN WHO HAS BEEN FIGHTING A HOPELESS CAUSE AGAINST THE CARDASSIANS ALL HER LIFE. SO IF YOU WANT A WAR, I’LL GIVE YOU ONE!”


Major Kira Nerys was the Bajoran in charge of Deep Space 9/Terok Nor until the Federation took it over.  At first resentful of her new boss, Kira quickly learned to deeply respect the new Commander and became his valued second-in-command.

This 1:6-scale figure presents Major Kira in her Bajoran militia uniform in exquisite detail. Standing approximately 11 inches tall it uses a newly developed EXO-6 female body. The original portrait sculpt of Nana Visitor has an authentic, hand-painted likeness.

The Major Kira 1:6 Scale Articulated Figure includes:

The Major Kira 1:6 Scale Articulated Figure includes:
Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 28 cm tall.
Realistic Portrait: Kira’s portrait is lovingly rendered by top artists, with an excellent likeness of Nana Visitor. It also has her Bajoran earring permanently attached. Each head sculpt is specially hand-painted.
Bajoran Uniform: Meticulously researched, this uniform matches the pattern and color of the original costume recreated in one sixth scale. A Bajoran com badge and rank insignia are permanently affixed to the uniform.
Boots: Plastic boots sculpted to match the cut and style of the original footwear.
Hands: A total of six interchangeable hands are included so she can be displayed holding her accessories.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Autograph card: An informational card that can be used to get an autograph from the performer and displayed with your figure.
Equipment
Major Kira uses various devices, she comes equipped with:

Bajoran phaser. The phaser can be worn in a holster that attaches to her belt.
TR-590 Tricorder X: This standard Starfleet tricorder which is held closed and open by a magnet.
PADD (Personal Access Display Device): the data display device used onboard Deep Space Nine.
This museum quality collectible figure continues our line of Star Trek: Deep Space Nine figures and is a great edition to your EXO-6 Star Trek™ Museum Quality 1:6-scale figure collection.



Height:

11 in

28 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures 1_webp11
Topics tagged under startrek on OneSixthFigures 2_webp11
Topics tagged under startrek on OneSixthFigures 3_webp11
Topics tagged under startrek on OneSixthFigures 4_webp11
Topics tagged under startrek on OneSixthFigures 5_webp11
Topics tagged under startrek on OneSixthFigures 6_webp11
Topics tagged under startrek on OneSixthFigures 7_webp11
Topics tagged under startrek on OneSixthFigures 8_webp11
Topics tagged under startrek on OneSixthFigures 9_webp11
Topics tagged under startrek on OneSixthFigures 10_web11
Topics tagged under startrek on OneSixthFigures 11_web11


#newproduct #EXO-6 #StarTrek #DeepSpaceNine #Major #KiraNerys #female #TV #Sci-Fi
Star Trek: The Next Generation

LT. COMMANDER DATA - ESSENTIAL VERSION (ie, what would normally be considered Standard)


Estimate delivery date:  4th Quarter  2023

1:6 Scale Articulated Figure

$190.00

“I WOULD GLADLY RISK FEELING BAD AT TIMES, IF IT ALSO MEANT THAT I COULD TASTE MY DESSERT.”



Data is one of the most popular characters in Star Trek, and no other character better expresses the wonder of discovery that is the heart of Star Trek than this android with a soul. The EXO-6 1:6 scale figure of Data will not only embody the hopefulness of the character, but also bring an element of Brent Spiner’s performance into collector’s homes.

When introduced in the first episode of Star Trek: The Next Generation, Data was a one-of-a-kind cybernetic organism, an artificial being that wanted nothing more than to be just like the imperfect humans he served with aboard the Enterprise. Throughout the series he evolved into a person, an officer and a friend to many of the crew.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 12 inches tall, every element, from his 24th century tunic to his custom black boots, is authentically reproduced. The original portrait sculpts of Brent Spiner as Data have authentic, hand-painted likenesses.

The EXO-6 Data Essential Version 1:6 Scale Articulated Figure includes:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Realistic Portrait: Lovingly rendered by a top artist, this is an excellent likeness of Brent Spiner in his role as Data. Each head sculpt is specially hand-painted.
Starfleet Duty Uniform: Meticulously researched, this duty uniform matches the pattern, and color of the original costume recreated in 1:6 scale. Magnets are sewn into the uniform so the holsters for the tricorder and phaser can be attached. An authentically scaled communicator badge is permanently affixed to the tunic.
Four interchangeable hands;
One pair of relax hands
One left phaser holding hand.
One Right tricorder holding hand.
Boots: Soft plastic boots sculpted to match the cut and style of the original movie footwear.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Accessories

Lt. Commander Data is outfitted with everything needed for a Star Fleet officer. He comes equipped with:

Type II hand phaser. The phaser can be worn in a black holster that magnetically attaches to the jumpsuit.
TR-580 Tricorder VII: This standard tricorder can be opened or worn in a holster.
This fine collectible figure is an excellent rendition of everyone’s favorite android and a great start to your EXO-6 Star Trek™: The Next Generation 1:6-scale figure collection.



Height:

11.8 in

30 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

Topics tagged under startrek on OneSixthFigures Data0110
Topics tagged under startrek on OneSixthFigures Data0210
Topics tagged under startrek on OneSixthFigures Data0310

Topics tagged under startrek on OneSixthFigures Data0410
Topics tagged under startrek on OneSixthFigures Data0510
Topics tagged under startrek on OneSixthFigures Data0610
Topics tagged under startrek on OneSixthFigures Data0710
Topics tagged under startrek on OneSixthFigures Data0810
Topics tagged under startrek on OneSixthFigures Data0910
Topics tagged under startrek on OneSixthFigures Data1110
Topics tagged under startrek on OneSixthFigures Data1210
Topics tagged under startrek on OneSixthFigures Data1610
Topics tagged under startrek on OneSixthFigures Data1710
Topics tagged under startrek on OneSixthFigures Data_w10
Topics tagged under startrek on OneSixthFigures Data_m10


Star Trek: The Next Generation

LT. COMMANDER DATA (STANDARD VERSION) (Would be considered Deluxe Version)


Estimate delivery date:  4th Quarter  2023

1:6 Scale Articulated Figure

$230.00

“I WOULD GLADLY RISK FEELING BAD AT TIMES, IF IT ALSO MEANT THAT I COULD TASTE MY DESSERT.”



Data is one of the most popular characters in Star Trek, and no other character better expresses the wonder of discovery that is the heart of Star Trek than this android with a soul. The EXO-6 1:6 scale figure of Data will not only embody the hopefulness of the character, but also bring an element of Brent Spiner’s performance into collector’s homes.

When introduced in the first episode of Star Trek: The Next Generation, Data was a one-of-a-kind cybernetic organism, an artificial being that wanted nothing more than to be just like the imperfect humans he served with aboard the Enterprise. Throughout the series he evolved into a person, an officer and a friend to many of the crew.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 12 inches tall, every element, from his 24th century tunic to his custom black boots, is authentically reproduced. The original portrait sculpts of Brent Spiner as Data have authentic, hand-painted likenesses.

The EXO-6 Data Standard Version 1:6 Scale Articulated Figure includes:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Two Realistic Portraits: Data Standard Version comes with two heads, his regular portrait and a head revealing the innerworkings of his cybernetic mind. Each head sculpt has a different look, showing the entire range of expressions that Data displayed. Sculpted by a top artist, these are faithful likenesses of Brent Spiner in his role as Data. Each head sculpt is specially hand-painted.
Starfleet Duty Uniform: Meticulously researched, this duty uniform matches the pattern, and color of the original costume recreated in 1:6 scale. Magnets are sewn into the uniform so the holsters for the tricorder and phaser can be attached. An authentically scaled communicator badge is permanently affixed to the tunic.
Seven hands for holding accessories and various poses:
One pair of relax hands.
One pair of fist hands.
One left phaser holding hand.
One right tricorder holding hand.
One duo purposes right communicator/PADD holding hand.
Boots: Soft plastic boots sculpted to match the cut and style of the original movie footwear.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Accessories

Lt. Commander Data is outfitted with everything needed for a Star Fleet officer. He comes equipped with:

Type II hand phaser. The phaser can be worn in a black holster that magnetically attaches to the jumpsuit.
TR-580 Tricorder VII: This standard tricorder can be opened or worn in a holster.
Personal Access Display Device (PADD).
Data’s pet cat “Spot” is also represented here by two different sculpts, one sitting and another designed to be held in Data’s arms.
This fine collectible figure is an excellent rendition of everyone’s favorite android and a great start to your EXO-6 Star Trek™: The Next Generation 1:6-scale figure collection.



Height:

11.8 in

30 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures Data_head_1024x1024@2x
Topics tagged under startrek on OneSixthFigures 20230611_162603_1024x1024@2x
Topics tagged under startrek on OneSixthFigures 366
Topics tagged under startrek on OneSixthFigures 466
Topics tagged under startrek on OneSixthFigures 564


#newproduct #EXO-6 #StarTrek #TheNextGeneration #LieutenantCommander #Data #male #TV #Sci-Fi
"Think about what's happened to us here aboard Voyager. Everyone left people behind, and everyone suffered a loss. But look how it's brought us all closer together. We found support here, and friendship, and we've become a family, in part because of the pain we share."

Son of a Starfleet Admiral, Tom Paris was kicked out of Starfleet, became a Maquis rebel and was incarcerated when Captain Janeway sought him out to help track down a Maquis ship. Trapped in the Delta Quadrant with the Voyager crew, Tom was reinstated and became an integral part of the crew as the Voyager’s pilot and helmsman.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 12 inches tall, every element, from his 24th century jumpsuit to his Starfleet boots, is authentically reproduced. The original portrait sculpt of Robert Duncan McNeill as Paris has an authentic, hand-painted likeness.

THE EXO-6 TOM PARIS 1:6 SCALE ARTICULATED FIGURE INCLUDES:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Realistic Portrait: Paris’ portrait is lovingly rendered by top artists, with an excellent likeness of Robert Duncan McNeill. Each head sculpt is specially hand-painted.
Starfleet Duty Uniform Jumpsuit: Meticulously researched, this duty uniform matches the pattern, and color of the original costume recreated in 1:6 scale. Magnets are sewn into the uniform so the holsters for the tricorder and phaser can be attached. An authentically scaled communicator badge is permanently affixed to the tunic.
Boots: Soft plastic boots sculpted to match the cut and style of the original series footwear.
Hands: A total of six interchangeable hands are included so he can be displayed holding the various accessories.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Autograph card: An informational LCARS card that can used to get an autograph from the performer and displayed with your figure.
EQUIPMENT

Tom Paris is outfitted with everything needed for a member of Voyager’s crew. He comes equipped with:

Type II hand phaser. The phaser can be worn in a black holster that magnetically attaches to the jumpsuit.
TR-590 Tricorder X: This standard tricorder can be opened or worn in a holster.
PADD (Personal Access Display Device): the data display device used onboard Voyager.
This fine collectible figure is a perfect companion to our other Voyager figures and a great addition to your EXO-6 Star Trek™ 1:6-scale figure collection.

Height:

12.5 in / 31.75 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

Topics tagged under startrek on OneSixthFigures Paris010
Topics tagged under startrek on OneSixthFigures Paris012
Topics tagged under startrek on OneSixthFigures Paris011
Topics tagged under startrek on OneSixthFigures Paris015
Topics tagged under startrek on OneSixthFigures Paris013
Topics tagged under startrek on OneSixthFigures Paris014
Topics tagged under startrek on OneSixthFigures Paris016
Topics tagged under startrek on OneSixthFigures Paris_10


#newproduct #Exo-6 #StarTrek #Voyager #LieutenantJuniorGrade #ThomasParis #male #Sci-Fi #TV
"Maybe it's not the destination that matters. Maybe it's the journey. If that journey takes a little longer, so we can do something we all believe in, I can't think of any place I'd rather be, or any people I'd rather be with.."



Eternal ensign Harry Kim served on Voyager as his first assignment after graduating Starfleet Academy. As a naïve and inexperienced young officer, he was taken under the wing of cocky Lt. Tom Paris and they because good friends. Harry was made Operations officer and becamr part of the senior bridge crew for Voyager’s time in the Delta Quadrant.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 12 inches tall, every element, from his 24th century jumpsuit to his Starfleet boots, is authentically reproduced. The original portrait sculpt of Garrett Wang as Harry Kim has an authentic, hand-painted likeness.

THE EXO-6 ENSIGN KIM 1:6 SCALE ARTICULATED FIGURE INCLUDES:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Realistic Portrait: Kim’s portrait is lovingly rendered by top artists, with an excellent likeness of Garrett Wang. Each head sculpt is specially hand-painted.
Starfleet Duty Uniform Jumpsuit: Meticulously researched, this duty uniform matches the pattern, and color of the original costume recreated in 1:6 scale. Magnets are sewn into the uniform so the holsters for the tricorder and phaser can be attached. An authentically scaled communicator badge is permanently affixed to the tunic.
Boots: Soft plastic boots sculpted to match the cut and style of the original series footwear.
Hands: A total of six interchangeable hands are included so he can be displayed holding the various accessories.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Autograph card: An informational LCARS card that can used to get an autograph from the performer and displayed with your figure.
SPECIAL BONUS ITEM: EXO-6 is giving Harry that promotion that he never received serving on Voyager. He will ship wearing his Ensign pip, but also included will be a Lieutenant JG pip so Harry can get that deserved promotion if you so desire.
EQUIPMENT

Harry Kim is outfitted with everything needed for a member of Voyager’s crew. He comes equipped with:

Type II hand phaser. The phaser can be worn in a black holster that magnetically attaches to the jumpsuit.
TR-590 Tricorder X: This standard tricorder can be opened or worn in a holster.
PADD (Personal Access Display Device): the data display device used onboard Voyager.
This fine collectible figure is a perfect companion to our other Voyager figures and a great addition to your EXO-6 Star Trek™ 1:6-scale figure collection.

Height:

12 in / 31 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

Topics tagged under startrek on OneSixthFigures Kim_0110
Topics tagged under startrek on OneSixthFigures Kim_0210
Topics tagged under startrek on OneSixthFigures Kim_0510
Topics tagged under startrek on OneSixthFigures Kim_0610
Topics tagged under startrek on OneSixthFigures Kim_0810
Topics tagged under startrek on OneSixthFigures Kim_0910
Topics tagged under startrek on OneSixthFigures Kim_1010
Topics tagged under startrek on OneSixthFigures Kim_1110
Topics tagged under startrek on OneSixthFigures Kim_1210
Topics tagged under startrek on OneSixthFigures Kim_mo10


#newproduct #Exo-6 #StarTrek #Voyager #Ensign #HarryKim #male #TV #Sci-Fi
“It knows only that it needs, Commander. But, like so many of us... it does not know what.”

Fans had been calling for a return to Star Trek and they got it with a big-budget theatrical motion picture that re-ignited the Star Trek franchise. Leonard Nimoy returned to the character of Spock after 10 years away from him.

Possibly the most popular character in all of Star Trek, Spock has left Starfleet and gone back to his home planet to learn what it is to be Vulcan. However, the V’ger probe interrupts his Kolinahr ritual and Spock knows that he must return to the Enterprise to save the galaxy. This Museum Quality 1/6 scale collectible figure from EXO-6 depicts Spock in the Vulcan robes he wore when he stepped on to the refitted Enterprise for the first time.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 12 inches tall, every element is authentically reproduced. The original portrait sculpt of Leonard Nimoy as Spock captures the stoic Vulcan in his best contemplative look and has a realistic, hand-painted likeness.

The EXO-6 Data 1:6 Scale Articulated Figure includes:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 31 cm tall.
Realistic Portrait: Lovingly rendered by a top artist, this excellent likeness of Leonard Nimoy as Spock is specially hand-painted.
Vulcan robes: This layered black cloak has Vulcan runes down the front matching the look from Star Trek: The Motion Picture. He wears black pants and boots to complete the outfit.
Boots: Plastic boots sculpted to match the cut and style of the original movie footwear.
Display Base: A hexagonal display base will provide additional support for the figure.
This fine collectible figure is a perfect representation of your favorite half-Vulcan and a great addition to your EXO-6 Star Trek™ 1:6-scale figure collection.

.Height:

12 in

31 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

*Duties, taxes, VAT, and any other charges related to customs clearance are not included in the price.

** Limited to ONE units per customer. Any order over 1 units will be cancelled.

*** 5 days processing time plus approximate 21 days international shipping.

Topics tagged under startrek on OneSixthFigures 11876
Topics tagged under startrek on OneSixthFigures 21097
Topics tagged under startrek on OneSixthFigures 3806
Topics tagged under startrek on OneSixthFigures 4754
Topics tagged under startrek on OneSixthFigures 5682
Topics tagged under startrek on OneSixthFigures 6640
Topics tagged under startrek on OneSixthFigures 7613
Topics tagged under startrek on OneSixthFigures 8584
Topics tagged under startrek on OneSixthFigures 9564


#newproduct #EXO-6 #StarTrek #TheMotionPicture #KolinahrSpock #male #movie #Sci-Fi
Star Trek: The Motion Picture

ADMIRAL JAMES TIBERIUS KIRK

Price $175.00 + $25 flat rate international shipping per figure* (from Exo-6 site)

1:6 Scale Articulated Figure

Limited to 2 per customer**

Approximate 21 days delivery turnaround ***

"They gave her back to me, Scotty."

A decade after leaving the small screen as Captain Kirk, William Shatner returned to the role of Admiral James T. Kirk, for a huge, big-budget theatrical motion picture that changed the Star Trek franchise forever and ensured its lasting legacy.

Now The Captain that started it all makes his first appearance as an EXO-6 Museum Quality 1/6 scale collectible figure from EXO-6. Depicted in his formal Admiral’s uniform, we see Kirk in his first appearance in Star Trek: The Motion Picture, recreating the look he had as he beheld his true love, the Enterprise, in all her refitted beauty.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 12 inches tall, every element, from his 23rd century uniform to his belt buckle bio-monitor, is authentically reproduced. The original portrait sculpt of Captain Kirk captures the moment he first saw the Enterprise in space dock and has a realistic, hand-painted likeness.

The EXO-6 Data 1:6 Scale Articulated Figure includes:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Realistic Portrait: Kirk’s deep affection for the Enterprise is evident on the face of this figure. Lovingly rendered by a top artist, this excellent likeness of William Shatner as Kirk is specially hand-painted.
Starfleet Formal Admiral’s Uniform: Meticulously researched, this duty uniform matches the pattern and color of the original costume recreated in 1:6 scale. Debated for years, the color of this film costume comes as close as possible to the actual set used colors that appeared on screen as grey or green, depending on the lighting in the scene. An authentically scaled bio-monitor is permanently affixed to the belt area.
Boots: Soft plastic boots sculpted to match the cut and style of the original movie footwear.
Display Base: A hexagonal display base will provide additional support for the figure.


This fine collectible figure is a perfect representation of your favorite Admiral and a great addition to your EXO-6 Star Trek™ 1:6-scale figure collection.



Height:

11.8 in

30 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

*Duties, taxes, VAT, and any other charges related to customs clearance are not included in the price.

** Limited to 2 units per customer. Any order over 2 units will be cancelled.

*** 5 days processing time plus approximate 14 days international shipping.


Topics tagged under startrek on OneSixthFigures 11870
Topics tagged under startrek on OneSixthFigures 21094
Topics tagged under startrek on OneSixthFigures 3803
Topics tagged under startrek on OneSixthFigures 4751
Topics tagged under startrek on OneSixthFigures 5679
Topics tagged under startrek on OneSixthFigures 6637
Topics tagged under startrek on OneSixthFigures 7610
Topics tagged under startrek on OneSixthFigures 8581
Topics tagged under startrek on OneSixthFigures 9561
Topics tagged under startrek on OneSixthFigures 10537
Topics tagged under startrek on OneSixthFigures 11871
Topics tagged under startrek on OneSixthFigures 12490


#newproduct #Exo-6 #StarTrek #MotionPicture #AdmiralJamesTKirk #male #movie #Sci-Fi
Pre-Order end date: Nov 17, 2022
Estimate delivery date: March 2023

“Take us out of the system. But not too quickly; the Andorian mining consortium runs from no-one!”
One of the defining alien races in Star Trek are the Andorians, and one of the most prolific actors in all of Star Trek is Jeffrey Combs, having played multiple characters over three different series. The latest release from EXO-6 brings out the best of both with Combs’ most popular character, the Andorian Imperial Guard Commander Thy’lek Shran.

When Captain Archer was bumbling around the Alpha Quadrant without shields, a reliable transporter or the Prime Directive, one of his most frequently encountered frenemies was the Andorian Commander Shran. The Andorians had a beef with the Vulcans and Shran educated Archer that they might not be the best allies, but Shran and Archer’s alliance helped pave the way for the birth of the Federation. After playing many different roles on Star Trek: Deep Space Nine, Jeffrey Combs embodied the feisty little Andorian perfectly – giving him a sense of conniving intelligence that was balanced with a profound sense of honor.

This 1:6-scale figure of Shran re-creates this iconic character in exquisite 1:6 detail. Standing approximately 11.5 inches tall, he wears the Andorian Imperial Guard three-tone uniform with a belt, armband and shoulder straps. He comes with an assortment of Adorian weapons including the ice blades used in his duel with Archer. The original portrait sculpt of Jeffrey Combs in full Andorian make-up was officially approved and has an authentic, hand-painted likeness.



THE EXO-6 CHAKOTAY 1:6 SCALE ARTICULATED FIGURE INCLUDES:
Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 29 cm tall.
Realistic Portrait: Shran’s portrait is lovingly rendered by top artists, with an excellent likeness of Jeffrey Combs in make-up. Each head sculpt is specially hand-painted.
Andorian Imperial Guard jumpsuit: Meticulously researched, this Imperial Guard uniform matches the pattern, and colors of the original costume recreated in 1:6 scale. A holster and two utility packs attach to the belt.
Boots: Plastic boots sculpted to match Andorian footwear.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure.
Hands: Six hands to display the various accessories.
EQUIPMENT
Andorian Plasma Rifle: The larger ground firearm used by the Imperial Guard.
Andorian Plasma Pistol: A single-handed firearm that fits in a holster on the thigh.
Ushaan-tor (2): Andoria is an icy planet where miners use these deadly looking icepicks. They are also used in the Ushaan, a duel of honor.
Ushaan gauntlets (2): Worn in the Ushaan, these armored gauntlets bind the dueling opponents together through the connected hand and wrist armor.
Andorian communicator
This fine collectible figure is a fan-favorite actor playing one of the most memorable aliens in all of Star Trek and a great addition to your EXO-6 Star Trek™ 1:6-scale figure collection.



Height:

11.5 in

29 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

Topics tagged under startrek on OneSixthFigures Scree423
Topics tagged under startrek on OneSixthFigures Scree422
Topics tagged under startrek on OneSixthFigures Scree421
Topics tagged under startrek on OneSixthFigures Scree426
Topics tagged under startrek on OneSixthFigures Scree425
Topics tagged under startrek on OneSixthFigures Scree424
Topics tagged under startrek on OneSixthFigures Scree427
Topics tagged under startrek on OneSixthFigures Scree882
Topics tagged under startrek on OneSixthFigures Scree882
Topics tagged under startrek on OneSixthFigures Scree429
Topics tagged under startrek on OneSixthFigures Scree430
Topics tagged under startrek on OneSixthFigures Scree428
Topics tagged under startrek on OneSixthFigures Scree431
Topics tagged under startrek on OneSixthFigures Scree883


#newproduct #Exo-6 #StarTrek #Enterprise #AndorianImperialGuardCommander #Thy'lekShran #male #Sci-Fi #TVseries
“My people taught me a man does not own land. He doesn't own anything but the courage and loyalty in his heart. That's where my power comes from.”

EXO-6’s continues the crew from Star Trek: Voyager with Commander Chakotay, a former member of the Maquis resistance group drafted into service by Captain Janeway when both their ships were transported to the Delta Quadrant. Provisionally reinstated to his former rank, Chakotay became Janeway’s first officer and the bridge between the Starfleet and Maquis crews.

Chakotay and Janeway became fast friends and more, and he served her well in the quest to return home from 70,000 light years away.

This 1:6-scale figure re-creates this iconic character in exquisite 1:6 detail. Standing approximately 12 inches tall, every element, from his 24th century jumpsuit to his Starfleet boots, is authentically reproduced. The original portrait sculpt of Robert Beltran as Chakotay has an authentic, hand-painted likeness.



THE EXO-6 CHAKOTAY 1:6 SCALE ARTICULATED FIGURE INCLUDES:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 30 cm tall.
Realistic Portrait: Chakotay’s portrait is lovingly rendered by top artists, with an excellent likeness of Robert Beltran. Each head sculpt is specially hand-painted.
Starfleet Duty Uniform Jumpsuit: Meticulously researched, this duty uniform matches the pattern, and color of the original costume recreated in 1:6 scale. Magnets are sewn into the uniform so the holsters for the tricorder and phaser can be attached. An authentically scaled communicator badge is permanently affixed to the tunic.
Boots: Soft plastic boots sculpted to match the cut and style of the original series footwear.
Hands: A total of six interchangeable hands are included so he can be displayed holding the various accessories.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure. Two different inserts for the floor of the base can represent the transporter pad or the center of the transporter array.
Autograph card: An informational LCARS card that can used to get an autograph from the performer and displayed with your figure.
EQUIPMENT

Chakotay is outfitted with everything needed for a member of Voyager’s crew. He comes equipped with:

Type II hand phaser. The phaser can be worn in a black holster that magnetically attaches to the jumpsuit.
TR-590 Tricorder X: This standard tricorder can be opened or worn in a holster.
PADD (Personal Access Display Device): the data display device used onboard Voyager.
This fine collectible figure is a perfect companion to our other Voyager figures and a great addition to your EXO-6 Star Trek™ 1:6-scale figure collection.

Height:

12 in / 31 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.

Estimated delivery January 2023

Topics tagged under startrek on OneSixthFigures Chakot10
Topics tagged under startrek on OneSixthFigures Chakot11
Topics tagged under startrek on OneSixthFigures Chakot12
Topics tagged under startrek on OneSixthFigures Chakot14
Topics tagged under startrek on OneSixthFigures Chakot13
Topics tagged under startrek on OneSixthFigures Chakot15
Topics tagged under startrek on OneSixthFigures Chokot10
Topics tagged under startrek on OneSixthFigures Chokot11
Topics tagged under startrek on OneSixthFigures Chokot12
Topics tagged under startrek on OneSixthFigures Chakot16


#newproduct #Exo-6 #StarTrek #Voyager #Lt.CommanderChakotay #male #TV #Sci-Fi
Star Trek: The Next Generation
LOCUTUS OF BORG
MSRP Price $245.00
1:6 Scale Articulated Figure
Pre Order Cut-Off: Oct 3rd, 2022
Estimated Time of Delivery: March 2023
"I am Locutus of Borg. Resistance is futile. Your life as it has been is over. From this time forward, you will service us."
EXO-6 is committed to bringing fans the finest 1:6 scale museum grade collectible figures from Star Trek™ that represent the characters in their most significant incarnations.

Captain Jean-Luc Picard of the Starship Enterprise-D faced his most difficult challenge after he was assimilated by the Borg. This was a major turning point in Picard’s life, leaving him feeling responsible for the 11,000 casualties at the battle of Wolf 359 and the destruction of 39 Federation ships. This battle even had lasting effects on other characters, as Deep Space Nine’s Benjamin Sisko blamed Picard for the death of his wife during the battle.

This one sixth scale museum grade figure re-creates the remorseless Borg from the classic Star Trek: The Next Generation episode “Best of Both Worlds, Part II” in exquisite detail. Standing approximately 12 inches tall, every element is reproduced as accurately as possible. The original portrait sculpt of Patrick Stewart reflects the stoic Borg expression and has a battery-operated red LED light in his head to simulate the Borg laser (not available in Australia, requires two (2) AG10/LR1130 cell batteries not included).



THE EXO-6 LOCUTUS 1:6 SCALE ARTICULATED FIGURE INCLUDES:
Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple poses, approximately 30 cm tall. Note – articulation limited by armor, no not attempt any extreme poses.
A mechanical appendage with articulated hooks and levers terminates his right arm. An additional grasping left hand is also included.
Realistic Portrait: Locutus’s emotionless expression shows no feeling for his fellows in Starfleet. Lovingly rendered by a top artist, this excellent likeness of Patrick Stewart as Locutus is specially hand-painted. Locutus’s laser is simulated by a red LED light in the head (Requires two (2) AG10/LR1130 cell batteries-not included).
Costume: The spokesman for the Borg wears a black body suit styled after the original costume. Over 30 armor pieces are attached, and specially designed tubing snakes around the entire body.
Display Base: A hexagonal display base will provide additional support for the figure.
Height:

11.8 in

30 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Topics tagged under startrek on OneSixthFigures Scree412
Topics tagged under startrek on OneSixthFigures Scree411
Topics tagged under startrek on OneSixthFigures Scree413
Topics tagged under startrek on OneSixthFigures Scree879
Topics tagged under startrek on OneSixthFigures Scree415
Topics tagged under startrek on OneSixthFigures Scree414
Topics tagged under startrek on OneSixthFigures Scree418
Topics tagged under startrek on OneSixthFigures Scree416
Topics tagged under startrek on OneSixthFigures Scree417
Topics tagged under startrek on OneSixthFigures Scree420
Topics tagged under startrek on OneSixthFigures Scree419
Topics tagged under startrek on OneSixthFigures Scree880


#newproduct #Exo-6 #StarTrek #TheNextGeneration #Locutus #Borg #male #TV-Series #Sci-Fi
"No matter how far we travel, or how fast we get there, the most profound discoveries are not necessarily beyond that next star. They’re within us, woven into the threads that bind us, all of us, to each other."

EXO-6 expands their line into the earliest space travelers from the Star Trek franchise – the crew of the NX-01, the first starship to be christened “Enterprise.”

Before the Federation, the Prime Directive, or a reliable transporter the NX-01 boldly went where humans had never gone before. Selected to captain that Enterprise was the space pioneer, Jonathan Archer. Accompanied by his faithful beagle, Porthos, Archer led the Enterprise crew in meeting Klingons, Andorians and other aliens for the first time. Played by Quantum Leap Alumnus Scott Bakula, Archer was a little rough around the edges compared to other Star Trek captains. Enterprise lasted four seasons and many feel it was just hitting it’s stride when it was cancelled.

This 1:6-scale figure of Captain Archer re-creates this iconic character in exquisite 1:6 detail. Standing approximately 12 inches tall, he wears the standard blue Starfleet jumpsuit with the NX-01 patch on the shoulder. The original portrait sculpt of Scott Bakula as Archer was personally approved by the actor and has an authentic, hand-painted likeness.

THE EXO-6 ARCHER 1:6 SCALE ARTICULATED FIGURE INCLUDES:

Fully Articulated Body: More than 30 points of articulation allow the figure to be displayed in multiple dynamic poses, approximately 31 cm tall.
Realistic Portrait: Archer’s portrait is lovingly rendered by top artists, with an excellent likeness of Scott Bakula. Each head sculpt is specially hand-painted.
Starfleet Duty Uniform Jumpsuit: Meticulously researched, this duty uniform matches the pattern, and color of the original costume recreated in 1:6 scale. The phase pistol holster attaches to a strap on the leg of the jumpsuit. Captain rank pips are permanently affixed on the right shoulder of the jumpsuit.
Boots: Soft plastic boots sculpted to match the cut and style of the original series footwear.
Display Base: A hexagonal display base featuring the transporter pad will provide additional support for the figure.
Hands: Six hands to display the various accessories.
Porthos: A 1/6 non-articulated figure of Archer’s beagle companion.
EQUIPMENT

Captain Archer is outfitted with everything needed for a Star Fleet officer. He comes equipped with:

Phase-pistol. The phaser can be worn in a black holster that hooks onto the jumpsuit.
Scanner: The precursor to the tricorder, the scanner has two tops so it can be displayed opened or closed.
Communicator: The early communicator with a flip top antenna.
This fine collectible figure is a perfect rendition of the first Enterprise captain in the history of Starfleet and a great addition to your EXO-6 Star Trek™ 1:6-scale figure collection.



Height:

12 in

31 cm

Materials:

ABS, PVC, natural and synthetic fabrics.

Prototype shown, actual product may vary.


Topics tagged under startrek on OneSixthFigures Archer11
Topics tagged under startrek on OneSixthFigures Archer10
Topics tagged under startrek on OneSixthFigures Archer12
Topics tagged under startrek on OneSixthFigures Archer14
Topics tagged under startrek on OneSixthFigures Archer15
Topics tagged under startrek on OneSixthFigures Archer13
Topics tagged under startrek on OneSixthFigures Archer16
Topics tagged under startrek on OneSixthFigures Archer18
Topics tagged under startrek on OneSixthFigures Archer17
Topics tagged under startrek on OneSixthFigures Archer19


#newproduct #EXO-6 #StarTrek #Enterprise #Captain #JonathanArcher #male #TV #Sci-Fi

Search found 38 matches for startrek

Go to page : 1, 2  Next

Back to top