Please help me find... (continuously updated)

Can anyone recommend a 1/6 bra that will fit an S10D or S12D well, underneath tight clothing, without leaving an obvious outline of the bra underneath the clothing?  Stretchy fabrics look great on the figure, but they can get a thin around the bust line, and I’ve even noticing some possible fading on a multicam top from it.

I’ve done searches on eBay, Toy Axiety, Monkey Depot, etc., so I have a pretty good idea of what’s out there.  I’m just hoping that someone can give me a first hand recommendation.

As far as bodies go, I know there are other choices with smaller bust lines, but I tend to stick with S10Ds and S12Ds because they seem to be the best overall fit when it comes to third party clothing.

First fishnets, now bras. This can be a very strange hobby at times.

Xavion, just so I know what I'm looking for so I can potentially help out - is the purpose to compress the breasts so they don't appear as large? Or multiple layers of fabric to offset visible nipples? Maybe the look requires visible straps on the shoulders?

I only ask because I'm assuming there is a purpose you're trying to achieve that her going bra-less wouldn't solve, and I've come up with some interesting solutions over the years to stuff like that.

LOL, indeed. I once expressed the opinion that if it is going to be covered up anyway, it is not necessary. And I was corrected in no uncertain terms by completists, who just wanted to know it is there. Unfortunately, I have persevered in my heresy, and can offer no true constructive perspective... Hope someone else does.

It’s a nipple issue on the two VeryCool Jenners, and then on the figure I’m working on, she’s got a black top on, but the fabric is a bit thin, and it’s a little too sheer for my tastes.  Not terrible, but noticeable.

Xavion2004 wrote:It’s a nipple issue on the two VeryCool Jenners, and then on the figure I’m working on, she’s got a black top on, but the fabric is a bit thin, and it’s a little too sheer for my tastes.  Not terrible, but noticeable.

Oh gosh, the nipples on those VC bodies are ridiculous. I remember trying to use one of those bodies in a tight outfit and I ended up selling it because it was just too 'in your face'.

Yes, they’re a bit much. Fortunately, it’s not an issue on my other VC girls because they have the fatigues over them, but with tops made out of stretch material, forgot it.

Just search on eBay, aliexpress and Etsy for “1/6 scale female underwear,” and there should be a number of choices. Like you, if it’s necessary, I also put undergarments on the figures, as it makes the most sense to me.

Here’s the one issue. I don’t think there’s anything inappropriate here, but if there is, please take it down. I want to see what Kallor8 has in mind, but if I need to go shopping, I’ll probably pick up a few inexpensive options off eBay or Aliexpress and see if I can find something that works.

Is that one of those rubber torso bodies? I wonder if you couldn’t just … ahh… shave the nipples down a bit (with sandpaper)?

No, that’s a TBL body…the case where the top is a little thin.. The two VC girls are rubber torso bodies, so that’s an option there, but doing any plastic surgery would be a last resort.

In this particular photo the problem is not too egregious, from what I can see, but perhaps it is worse from other angles. I find it a little annoying but enough to make me want to resort to plastic surgery. Is there some sort of small shallow cup type object you could stick over the nipples that would make them less pronounced? Of course that might exaggerate the bust more...

If you had some thin black fabric, you could just make like a 'bandeau' top or tube top type thing to go underneath.

Sorry, I think I may have created a bit of confusion .  It’s two separate issues, and I think some type of bra could fix both of them.  The pic I posted above is the instance where the fabric is stretched a little too thin.  It’s not the nipples, it’s the translucence.

The two Very Cool girls with the nipple issues are the Jenners, right out of the box with no changes.  It’s even an issue in the promo pics.



Neither instance is anything that I can’t live with, but if there’s a way to “correct” it, then I’d like to.

SWS, I have thought about what you suggested, and that may very well be the best option.  If there’s no hems along the edges, and no straps, it will be a lot more inconspicuous.   I’m concerned that if the shirts are that tight, any finished bra I try to use would leave an outline.

It’s funny, but it just occurred to me that a real woman wearing a relatively thin, skintight shirt would have the same issues/dilemma, just hopefully not as exaggerated.  I don’t know why I expect 1/6 to behave any differently.

But… on thin, tight tops bras DO leave outlines. It’s sort of inevitable.

Regarding fishnet stockings, I also saw this other version by FireGirl --

https://www.ebay.com/itm/144078735341?var=443380270198

which seems to have smaller gaps than this one --

https://www.ebay.com/itm/144021697305?hash=item21885cb319:g:oBsAAOSwewdfbAuS

Both are seamless.

GubernatorFan wrote:Regarding fishnet stockings, I also saw this other version by FireGirl --

https://www.ebay.com/itm/144078735341?var=443380270198

which seems to have smaller gaps than this one --

https://www.ebay.com/itm/144021697305?hash=item21885cb319:g:oBsAAOSwewdfbAuS

Both are seamless.

Yeah, it is hard to tell if the overall impression of those smaller gap ones is fisnets or just solid tights. I only own the fishnet ones and I think they look great, but to each their own.

ETA: LOL, Xavion -- yes, our bras have outlines in real life, too.  Even a plain sports bra will still show a bit, it's just inevitable.  

I think you could minimise the outline by going with a material that doesn't require hemming, such as a thin spandex or jersey knit that doesn't fray. Then all you'd have to do is cut it to size, and then just sew it tightly in the back (or use fabric glue , whatever).

This might sound odd but.......
has anyone seen any 1/6 balloons?
i can find quite a few different 1/12 but nothing thats a bit bigger.
I also havent seen anything i could use, i was looking at using egg shaped packaging, but none of that seems as though it would look right either. mmmmmmm
Someone MUST have made them at some point?

I'm not quite sure of the precise measurement on this one, but it was the only thing that looked semi convincing that came up straight away in a search:

https://www.aliexpress.com/item/4000203793027.html?spm=a2g0o.productlist.0.0.3a061f8bCfWrW5&algo_pvid=dea241ef-817c-44f5-a626-f97783f96edb&algo_exp_id=dea241ef-817c-44f5-a626-f97783f96edb-5&pdp_ext_f=%7B%22sku_id%22%3A%2210000000775664454%22%7D

I'll keep my eye out, though...

skywalkersaga wrote:I'm not quite sure of the precise measurement on this one, but it was the only thing that looked semi convincing that came up straight away in a search:

https://www.aliexpress.com/item/4000203793027.html?spm=a2g0o.productlist.0.0.3a061f8bCfWrW5&algo_pvid=dea241ef-817c-44f5-a626-f97783f96edb&algo_exp_id=dea241ef-817c-44f5-a626-f97783f96edb-5&pdp_ext_f=%7B%22sku_id%22%3A%2210000000775664454%22%7D

I'll keep my eye out, though...

THANKS!
I knew i had seen them somewhere but couldnt think where it was.
That is far and away the best thing i have seen.
might have to get them even if £8 a piece seems a bit OTT.

Let us know how they turn out!

GubernatorFan wrote:Regarding fishnet stockings, I also saw this other version by FireGirl --

https://www.ebay.com/itm/144078735341?var=443380270198

which seems to have smaller gaps than this one --

https://www.ebay.com/itm/144021697305?hash=item21885cb319:g:oBsAAOSwewdfbAuS

Both are seamless.

I’ve already brought the pair in the first link, but they're too dark unfortunately.




May seem like I’m being a bit fussy but I’m aiming to get something that’ll be as accurate as possible.

I’ve now ordered the pair in the second link, plus an a Fire Girl FG068 swimsuit outfit for the fishnets it comes with, and will see which ones looks best when they arrive.

Ah, I see what you mean. In their defense, they look like they did in the promotional images. So maybe the other ones.

As for 1/6 balloons, maybe some came with the various Joker and Pennywise figures?

Xavion, there are some seamless figures that don't have nipples on the body, as well.  I have two Jiaou in my collection like that, from the angel Yan and the silver haired angel one I believe, and there's likely a base body that corresponds.  I have also had success with the bandeau method, there are certain types of small scunci hair elastics ("ponytailers") that "unroll" and blend into the black top if you find the right size.  It's really dependent on the materials, though, of course, some things are just too sheer and maybe you could go for a sturdier pleather black top in the same shape.

That is true, Toy Anxiety has some seamless bodies in stock parted out from sets, and at least some of them are not fully detailed. They do not censor their photos, so you can see exactly what you would be getting.

teamweapon wrote:

skywalkersaga wrote:I'm not quite sure of the precise measurement on this one, but it was the only thing that looked semi convincing that came up straight away in a search:

https://www.aliexpress.com/item/4000203793027.html?spm=a2g0o.productlist.0.0.3a061f8bCfWrW5&algo_pvid=dea241ef-817c-44f5-a626-f97783f96edb&algo_exp_id=dea241ef-817c-44f5-a626-f97783f96edb-5&pdp_ext_f=%7B%22sku_id%22%3A%2210000000775664454%22%7D

I'll keep my eye out, though...

THANKS!
I knew i had seen them somewhere but couldnt think where it was.
That is far and away the best thing i have seen.
might have to get them even if £8 a piece seems a bit OTT.

GOD DAMN IT!!!!!
went to buy those balloons off ali express and they wont ship to UK!
BAH!

teamweapon wrote:

teamweapon wrote:

skywalkersaga wrote:I'm not quite sure of the precise measurement on this one, but it was the only thing that looked semi convincing that came up straight away in a search:

https://www.aliexpress.com/item/4000203793027.html?spm=a2g0o.productlist.0.0.3a061f8bCfWrW5&algo_pvid=dea241ef-817c-44f5-a626-f97783f96edb&algo_exp_id=dea241ef-817c-44f5-a626-f97783f96edb-5&pdp_ext_f=%7B%22sku_id%22%3A%2210000000775664454%22%7D

I'll keep my eye out, though...

THANKS!
I knew i had seen them somewhere but couldnt think where it was.
That is far and away the best thing i have seen.
might have to get them even if £8 a piece seems a bit OTT.

GOD DAMN IT!!!!!
went to buy those balloons off ali express and they wont ship to UK!
BAH!

OK! so that was the first time using ali exp and for some reason had defaulted to albania for where the shipment going to, which is why it said they wouldnt ship there!
ok now placed the order, thanks for the tip off skywalkersaga
i shall let you know what they look like

LOL, aww, glad it worked out! And yeah, aliexpress is a bit crazy to figure out at times... ;p

But what if someone was from Albania? No fair! I'm glad it worked for you, though, teamweapon.

I couldn’t find the clothing thread, so I’ll just check here in hope that someone can point me in the right direction.

If you would all be so kind, I’m looking for a pair of jeans that will fit the TBL S07C body that will allow for, hopefully, some articulation of the legs. Everything I’ve found online seems to, at least visually, be waaaaay too small.

As the say on the internet: HALP!!