Clothing TBLeague / Phicen Seamless Bodies updated: Part XXX, December 2022

DMAN970 wrote:Which body is Best for my 1/6  Vegeta figure

Phicen M30 or M33

He is supposed to be buff, right? M30 is buff but a little short. M34 and M35 are more buff and taller. M33 is probably just a little too lean for that look. Of the these, M30 comes closest to anime style (a little more abstract).

Consult the TBLeague seamless bodies catalog:
https://onesixthfigures.forumotion.com/t3013-tbleague-phicen-seamless-bodies-with-steel-skeleton-catalog-updated-continually

In terms of skin tone, although there are no guarantees with differences between screen settings and light exposure, your Vegeta's skin looks quite pale. I'm not quite sure any TBLeague body would match. Jiaou's bodies come in three (in once case four) skin tones (YS, BS, and PS), and it is possible one of them would work better; their buffest one is the 12D body. You can see them, alongside with some TBLeague for comparison, in the following thread -- scroll down to part 2 to see all of Jiaou body models and skintones:
https://onesixthfigures.forumotion.com/t3830-jiaou-doll-male-bodies-10a-11c-12d-and-tbleague-m30-m33-m35-comparison

I hope this helps.

Given that Vegeta is rather small compared to Goku, i would say m30 is probably the best fit.

But like Gubernator said, dont know if the color checks out with the bright skin color of the head.

That head looking rather big, I hope it does look good on a standard 1/6 body i the end.

This how far i got with goku all i need is dye for the body and i will be good to go

Are you sure that head works, size-wise?

GubernatorFan wrote:Are you sure that head works, size-wise?

Actually i did more editing after this photo also the seller said he needs the clothes as well so i gotta get those

isn't the vegeta head more 1/4 scale than 1/6...? it seems quite big in your hand

blackpool wrote:isn't the vegeta head more 1/4 scale than 1/6...? it seems quite big in your hand

Well his hair tilt backwards and not upwards completely

BJDBUS on Amazon sells a Barbie sweater dress that fits TBLeague S49. It's a cowl neck, so you can do a wide turtleneck look or off-the-shoulder. I've cinched the waist with a binder clip in the back to show off her curves, but it looks fine without any modification.

craftsrmyluvlanguage wrote:BJDBUS on Amazon sells a Barbie sweater dress that fits TBLeague S49. It's a cowl neck, so you can do a wide turtleneck look or off-the-shoulder. I've cinched the waist with a binder clip in the back to show off her curves, but it looks fine without any modification.

Thank you for the recommendation, I need more sweaters! And nice work with this figure, the couch, and the printing press!

GubernatorFan wrote:
Thank you for the recommendation, I need more sweaters!

There is a source for hundreds, maybe thousands of sweaters and I have shown where.

Example from a burned past :

It's sad this one burned. But nice that you were able to salvage as much as you did.

The figure (head and body) didn't survive but at least the fireplace, the sweater and probably the socks did. Everything else is still MIA.
The sweater (from Sindy) is now under treatment as it is very dirty.
So, if you want sweaters galore, check any fashion doll catalogue.

The sweater, but it's not exactly the same one, this one is rather rough. Production was spread over a number of factories hence fabrication quality and used materials varied.

GubernatorFan wrote:Part XXIII: clothing the Tall One and KUMIK shoes

Someone asked me specifically about clothing the basketball-player-type M36 bodies, which we have always expected to be trouble. And it is. Finding things that will both fit and look suitably long is going to be a challenge, although if you have specifically basketball-related items (including the tank top and shorts), perhaps that would not be much of an issue. But here are a couple of casual options.

I know I'm always asking about heads. But I really like some. In this case. What head is the one on the M33 body?

I'll try some bjds jeans on my M36 to see how well they fit in the legs. Might be another choice in clothes. My Minifee shirts (40cm give or take) fit the 17 JIAOU.  Although long. But it's nice to pretend it's a ancient tunic.

Esganado wrote:

GubernatorFan wrote:Part XXIII: clothing the Tall One and KUMIK shoes

Someone asked me specifically about clothing the basketball-player-type M36 bodies, which we have always expected to be trouble. And it is. Finding things that will both fit and look suitably long is going to be a challenge, although if you have specifically basketball-related items (including the tank top and shorts), perhaps that would not be much of an issue. But here are a couple of casual options.

I know I'm always asking about heads. But I really like some. In this case. What head is the one on the M33 body?

I'll try some bjds jeans on my M36 to see how well they fit in the legs. Might be another choice in clothes. My Minifee (40cm give or take) fit the 17 JIAOU.  Although long. But it's nice to pretend it's a ancient tunic.

Looks like the young Han Solo?

Esganado wrote:I know I'm always asking about heads. But I really like some. In this case. What head is the one on the M33 body?

Yes, as Dal said, it is a "Young Han Solo." Or, as I prefer to think of it, that Han Solo impostor, Alden Ehrenreich.
The head is from one of the two Hot Toys Solo: A Star Wars Story sets, either Han Solo or Han Solo (Mudtrooper). Because of the use of the same head by the two sets, these might still be findable.