Visisonor-induced visions

Visisonor wrote:

GubernatorFan wrote:She looks very good and quite human.

French wrote:I already wanted to make a creation with a Tb league 1/12 body, dressing it up is too complicated.

I've been doing it for years. And in my experience, it's not harder than with 1/6, and in some cases easier. The pants from CJG-049 set featured in the second half of this post can take literally an hour to put on.

Yes I know, I bought pants/tights, and it took me that long to put them on

She looks great! I specially like that last picture with the background blurred.

But those jeans are beautiful!! And the top, too! I've never noticed that before. And the boots look great, too!  

I love that sculpt, too. Shame that I missed out on that guardian, thinking that I already had a beautiful red head with Sonja, and of course four other guardians. But this sculpt is quite special!

Thanks, Diana.
Jeans are beautiful, yes, but kind of fiddly. The belt is needed, otherwise they don't look realistic enough, and it has to be arranged precisely, but it keeps shifting around if you look wrong at it.

Supermen return



Another Supes.



This time it is the "Red Blue", or "Mr Super" body by Manipple, sold as body only.

With a head, also by Manipple, which I've obtained earlier, and in multiples:

The Three Cavills

It is Mezco scale, but slightly shorter than BMS Steel Justice, another third party figure.


Though on some of my photos the head sits too high.


Cinematic Supermen

Articulation is relatively decent, but it is limited by the suit, which is somewhat tight. On a positive side, the suit sits better than that of the BMS figure.



So this closes the DCEU standard suit gestalt, and is also pretty close to closing the modern comic one. And this is a decent alternative to Mezco DCEU Superman, which was released long time ago and is now very hard to find.

Pretty boys !
Looking great together.

Yes I agree, they look fantastic together. Could the head look to be sitting too high because of a camera angle? They all look god to me.

Truly pretty

They all looks really good!! That head is amazing. My favourite body is the tallest one though, despite the slight crinkles in the suit. I just prefer the proportions.

Thanks, everyone.
I most likely didn't pick photos with head sitting higher. Only the first one, when he is looking down.
And I feel the same way about proportions, BMS Steel justice looks better in this regard.

Little Armory Shoots Again

(and probably not for the last time)

The XM2010 has been my favourite sniper rifle in both 1/12 and 1/6 scales.
In 1/12 it is represented by a Little Armory model kit. I've kept my first sample unpainted, though it seems to have accumulated some dust (and traces of sticky tac to strengthen the foldable stock hinge):


However, I've recently acquired another one, and decided to paint some parts of it to match the 1/6 scale version:


I went a bit overboard with it actually, the larger version is still mostly black except for scope and suppressor:


Still, I'll probably add some paint to the first all-black rifle too. It may benefit from painted rivets, and maybe the barrel.

In addition to XM2010, I've also bought a M24A2 model kit, and painted some parts of it too - though here the difference between painted and unpainted doesn't stand out too much:


It also comes with this catadioptric scope attachment (which is most likely a night sight):


It won't dethrone the XM2010 because the latter has pistol grip which is easier to fit into hands of action figures. But it's nonetheless a fine addition to my 1/12 scale weapons collection.

Nice work indeed, and nice weapons too. I often dry-brush model kit weapons too.

Nice work and great presentation! I enjoyed it despite not being a weapons person.

Your work reminds me of an old comedy film, "Austin Power 2" with "mini me", where the bad guy had made a little copy of himself.

Thanks!

BAMComix wrote:I often dry-brush model kit weapons too.

I like model kits because different parts can be painted differently (or left unpainted) without any need for masking.

Diana wrote:I enjoyed it despite not being a weapons person.

Glad to hear

French wrote:where the bad guy had made a little copy of himself.

Yeah, it's inevitable for me with multiple scales, especially since I recreate my 1/12 scale in 1/6.

Looks like your little ladies will be well-armed for the next 12th-scale adventure.

GubernatorFan wrote:Looks like your little ladies will be well-armed for the next 12th-scale adventure.

Oh yeah, they've been well-armed for a long time
The real challenge is to write this adventure (working on it).

Winter Soldier

AKA Masked Killer by Nota Studio.
Since he is available at Giantoy right now, I decided to post a mini-review of him.



I've actually received him several weeks ago but was busy.

The release was delayed significantly. The package includes a note with apologies. Apparently they had to move production to another factory and redesign the figure. The most noticeable sign of that is a mismatch in the scale of weapons: they seem to be TBL/SHF size while the figure is Mezco scale.



Prosthetic arm is single-jointed - IIRC it was double-jointed in promo pics. It still bends way past ninety degrees though, but the manual warns against leaving it in this position for long.



There are several face plates and multiple hair pieces (at least in Deluxe version). The variety of looks is really impressive. The likeness is probably not so impressive. But Sebastian Stan is often said to look similar to Mark Hamill, who is very hard to capture in action figure form.



The deluxe version is really loaded with accessories. Too many to list them individually. Guns, knives, muzzle effects...



Of note, there is a second version of a Barrett M82, in gold (a good illustration for Awesome But Impractical trope) - listed as a gift item (both rifles attach to his back magnetically)


...and the shield with special holder attachment for the shield capture pose:


As mentioned earlier, he is Mezco scale, but proportions are somewhat different:




Anyway, my overall impression is I'm glad that I have it (especially since I've paid for it literally years ago and don't remember how much), but I wouldn't be too sad if I didn't.
It is the only representation of Bucky in the "cloth action figure" category at this scale. Other versions may have better articulation or likeness, but this one works for me.

Wow! so cool!

I can definitely see why he works for you. And I agree. Very impressive, actually.
And thanks for making the time to share this with us, while it is still in stock.

Wow! I really like this one. Multiple face plates AND hair AND fabric clothing. That is awesome! I like the proportions, too! He looks great in all the group shots. Nice grab!

BAMComix wrote:Wow! so cool!

Thanks!

GubernatorFan wrote:while it is still in stock.

It was out of stock for a while when it was shipped and now appeared in stock again in multiple places.

Diana wrote:Multiple face plates AND hair AND fabric clothing. That is awesome!

Would be better with rooted hair But alas, I've seen it only on female figures at this scale.

Concept art time:

Riders of the (post-)apocalypse



The human part of protagonists at some time during the sequel (which is not posted yet but being worked on).

Pictured with two 1/12 scale motorcycles (by Maisto and Aoshima) and G. I. Joe Stinger (which seems to be more properly scaled than MMMtoys M2101).

Woooow! Great shot!! The posing is excellent (as usual)! 

Nice shot of humans and machines, all nicely scaled. Also like the somewhat drab feel of the city street backdrop.

Diana wrote:The posing is excellent (as usual)! 

GubernatorFan wrote:Also like the somewhat drab feel of the city street backdrop.

Thanks, and glad you like it!
The backdrop is Extreme Sets Building 3.0, it already became a staple in my collection. The only downside is that I use it too often (but it's not really a flaw of the backdrop itself).

Nice! is that a classified Cobra vehicle??

BAMComix wrote:is that a classified Cobra vehicle?

Yes!
With logo edited out in post-processing.




I've learned of existence of VAMP too late, and it was some kind of exclusive. But when Stinger was announced, I've ordered it immediately. Both of them work perfectly as vehicles for my setting.

Visisonor wrote:

BAMComix wrote:is that a classified Cobra vehicle?

Yes!
With logo edited out in post-processing.




I've learned of existence of VAMP too late, and it was some kind of exclusive. But when Stinger was announced, I've ordered it immediately. Both of them work perfectly as vehicles for my setting.

The the G.I.Joe classified are the perfect size for out 1/12 scale buddies. Do you use Pulse?

https://www.hasbropulse.com/uk/[/quote]

Yes they do!