Project - Asami Yamazaki (from Audition)

That's interesting and you from what we have seen so far you've done an excellent job in matching the images. For the skirt you could try giving her a half slip to try and make the skirts fabric a bit more dense.

Theboo-bomb wrote:That's interesting and you from what we have seen so far you've done an excellent job in matching the images. For the skirt you could try giving her a half slip to try and make the skirts fabric a bit more dense.

That's an idea. Thanks.
It might bulk things out more than need be.
The black rubber apron will have the added bonus of blocking out light.

(cont.)


Audition - Asami Yamazaki - Black Rubber Apron

Asami Yamazaki wears a type of black rubber slaughter-house/butchers apron that ends just above the knee area. The left and right sides of the apron are held in place by black straps that wrap around and connect up at the back. Around the neck area appears to tan colored straps. They are either made from leather or rubber? All straps both black and tan appear to be held in place by silver metal studs.

Maybe the apron exists in the real world, or maybe the apron is a prop designed for the movie?



Black Rubber Apron - Materials

I had some idea of how to approach re-creating such an item in 1/6th scale.

Searching ebay I found:
1mm Sheet of Black Rubber
Action Man Water Bottle
1mm/0.8mm Micro Dot Rivet Nail Art Decoration
0-6/0-8 mm Tan Color Leather (not pictured)



Black Rubber Apron - 90% complete

Using reference photo’s, the height/width of the apron was calculated. The left & right angles were calculated by using the neck and side strap positions. The 1mm black rubber feels thicker than anticipated. Thinner rubber might have worked better. 1mm black rubber was the thinnest I could find.

The black side straps were taken from an Action Man water mottle. They are glued in place. For added strength I used a needle and cotton where the silver rivets would be located.

The neck straps were cut from tan Color leather and glued in place. I noticed in the reference photo’s the straps enter through slots in the Apron. I added both slots and pulled the Tan Color Leather straps through the slots. This has the benefit of added strength.

To complete the Apron the plan is to add silver rivets. I found something called:
1mm/0.8mm Micro Dot Rivet Nail Art Decoration
I think these will do the trick. For the moment they are on the slow plane from China.
Once they arrive, the plan is to glue them into position. X mark the position(s).
If the Micro Rivets fail to work, then a new direction will have to be taken.


Once the Apron is complete, the plan is to clean it up using silicone rubber spray, as it keeps rubber alive and smells better.
The 1mm sheet of rubber I am using stinks of chemical.

The Action Man water bottle has another use. It came with 4x metal strap slider components, which are ideal to be used on the 4 arm straps.
Attempting to located such metal sliders on their own proved impossible.

Audition - Asami Yamazaki - Fan Art

Found some more Fan Art.
This sort of thing keeps my motivation going

Maybe Audition is more popular than i first thought?

It is interesting to see how others believe what they might, might not have seen?
What is on each end of the wire? ..does the wire attach to the tops or bottoms?
How many straps were there around the waist area? one artist appears to have seen 5?
Are the arm straps above or below the elbow?

I don’t know what she had on the ends of her garrote, but most modern-day ones have either metal rings or small wood handles — makes it easier on the users hands, as pulling wire tight around a persons neck can hurt your hands just as much as it hurts the victim (well, not entirely... but it is pretty painful).

Stryker2011 wrote:I don’t know what she had on the ends of her garrote, but most modern-day ones have either metal rings or small wood handles — makes it easier on the users hands, as pulling wire tight around a persons neck can hurt your hands just as much as it hurts the victim (well, not entirely... but it is pretty painful).

Having looked and looked as much as possible at the all too few moments the movie offers a view of what is attached to the end of each end of the (piano?) wire, appears to be made of not so new metal, possibly silver with paint chipped off.. ..rusty? ..old?
If i am correct, they are some sort of handle, possibly door handles?

One thing is for sure, the way she holds them, means the wire is attached at the bottom end, not the top end.


Audition - Wire (weapon)

(cont.)


Audition - Asami Yamazaki - Arm Straps


4x Tan Leather Arm Straps

Small (easy) job today. 4x arm straps. Made using strips of tan leather.
I think the strips in the movie are made from rubber.
4x metal strap slider components were ideal, and came from an Action Man water bottle
(the same water bottle mentioned in one of the posts above).

The straps are 90% complete. They need to be cut shorter.
Once the 1mm/0.8mm Micro Dot Rivet Nail Art Decoration’s arrive, the plan is to add 2 to each strap to look like rivets.

Yep. The garrote looks to be attached to drawer/cabinet handles.

Stryker2011 wrote:Yep. The garrote looks to be attached to drawer/cabinet handles.

I have found some mini door handles i plan on customizing.
While they are not 100% accurate, they do have the pointy top and bottom design. I figured the middle part will be out of view, as it will be hidden by the hand(s).

Oh wow, where did you find such tiny 'rivets'? I have been looking for some myself for a while...

skywalkersaga wrote:Oh wow, where did you find such tiny 'rivets'? I have been looking for some myself for a while...

Ebay

I stumbled across them by accident.
Given their name, they appear to be a product used in nail bars.
They cost very little for a bag of 100
I still do not know if they are made from plastic or metal?
..or if they are solid or hollow?

Thanks, I'll have a look!

The outfit for your figure is coming together really well. It's very satisfying to see people's creativity on this forum, and what can be done with what are sometimes unexpected supplies and materials.

Audition - Asami Yamazaki - Fan Art

More Fan Art.

The Garrote appears to be the most popular weapon, followed by the Syringe.
Sometimes the Spikes make an appearance.

skywalkersaga wrote:Thanks, I'll have a look!

The outfit for your figure is coming together really well. It's very satisfying to see people's creativity on this forum, and what can be done with what are sometimes unexpected supplies and materials.

Thanks.

I am still working on a solution to the black arm coverings.
I have looked online, but there did not appear to be anything quite like that available.

My 1st idea was long black balloons cut down to size.
This idea did not work out. The balloons were too narrow.
I tried filling them with water to stretch them. This had some effect, but not enough.

My 2nd idea involved cutting up some black rubber and stitching it together to form a tube.
This idea failed also. It looked too bulky.

My 3rd idea was to source some black tubing.
Searching on ebay all i could find was tubing that was too thick walled.
I spotted something called heat-shrink-tubing 12mm in diameter. It was cheap, so i ordered 1 meter of that.
Only once it arrives will i be able to tell if it is suitable?

Regarding the black gloves.... I'm thinking you could get black-gloved female hands, and then make the sleeve part of the glove a separate piece.... using whatever you feel works best. Either faux leather, some kind of black plastic, or whatever else you have access to. I have seen black disposable examination gloves, which you could cut two small pieces out of to use as the sleeve part of the gloves. Don't know how readily available those will be though, given how 'in-demand' almost any form of PPE is right now, but it's worth a try?

skywalkersaga wrote:Regarding the black gloves.... I'm thinking you could get black-gloved female hands, and then make the sleeve part of the glove a separate piece.... using whatever you feel works best. Either faux leather, some kind of black plastic, or whatever else you have access to. I have seen black disposable examination gloves, which you could cut two small pieces out of to use as the sleeve part of the gloves. Don't know how readily available those will be though, given how 'in-demand' almost any form of PPE is right now, but it's worth a try?

1/6th Scale Black Gloved Hands

These black gloves were the best i could locate.
They are a pre-order. 8 weeks wait atleast.

If i can join the arm sections onto these gloves, then the results should look ok.
I hope to be able to cover the straps on the gloves with the arm sections, as they are supposed to look like one piece.
I went with these gloves, as they almost look like rubber.

The hand position/pose is ideal to hold the Garrote weapon.

Those definitely look the part -- frustrating about the wait. Are there any less-accurate black glove hands you could use as stand-ins in the meantime?

skywalkersaga wrote:Those definitely look the part -- frustrating about the wait. Are there any less-accurate black glove hands you could use as stand-ins in the meantime?

I have some Hot Toys - Deadpool hands

(cont.)


Audition - Wire (weapon)


Seller's Image (left) Assembled repainted (right)

This is about the best I can come up with at the moment when it comes to the Garrotte handles.

The Garrotte handles are made from 1/6th scale metal door handles.
The hole at the top of each handle was drilled to make it wider.
I cut the threaded bar in half and screwed each half into each of the newly drilled holes.
I bent the door plates to add curvature. The hands to hide the middle part of the handle.
The gold was painted black. Over the black, silver paint was added to highlight some of the details and make the surface look aged.

Once the Micro Dot Rivet Nail Art Decoration's arrive, i might add one to each handle in place of the silver dot currently painted onto each door-knob.

All I need to do now is added wire. The length of the wire cannot be worked out until I have fitted both hands. I don’t have the wire yet. I could use cotton.
I spotted during the movie, during one scene, the wire is obviously string (probably in the name of safety).

It has entered my mind that the hands (which are currently on pre-order) are solid.
I might have to cut the handles down and insert the top and bottom into the hands.

Good find for the handles. Might I suggest vinyl for the arm sleeves (and possibly even the apron). There is really thin vinyl out there (used by the fetish community) that should wrap tighter (you’d have to sew them yourself (or use glue).

https://www.etsy.com/listing/633477836/glossy-stretch-fetish-patent-vinyl?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=vinyl+fetish&ref=sr_gallery-1-2&col=1

Stryker2011 wrote:Good find for the handles. Might I suggest vinyl for the arm sleeves (and possibly even the apron). There is really thin vinyl out there (used by the fetish community) that should wrap tighter (you’d have to sew them yourself (or use glue).

Thanks.

I will give that more thought, once the heat-shrink-tubing arrives.
The heat-shrink-tubing cost next to nothing. If it's too plasticky / non flexible enough, then it won't be any good.

Good call on the vinyl, Stryker. Didn't even occur to me... ;p

And ukshaun, your attention to detail is admirable. So far everything is really looking the part.

Your dedication to accuracy is outstanding, really like the doorknob idea. I think the wire can be rolled onto the knobs?

Ovy wrote:Your dedication to accuracy is outstanding, really like the doorknob idea. I think the wire can be rolled onto the knobs?

When held, the 'door knobs' are at the top pointing towards the body.
The wire is attached at the bottom through the small hole(s).

(cont.)


Audition - Asami Yamazaki - Waist Straps

Around Asami Yamazaki’s waist appears to be 3x beige colored, possibly rubber, thick straps, linked at the rear to a large black rubber section.
Quite what their purpose is, I do not know?
Do they exist in the real world, or are they some form of nightmare prop design?



Waist Strap - Materials

I had some idea of how to approach re-creating such an item in 1/6th scale.

Searching ebay I found:
1mm Sheet of Black Rubber
Action Man Bread Bag (for the metal ‘D’ clips)
Action Man German Parachute (for the Snap Hooks)
1mm/0.8mm Micro Dot Rivet Nail Art Decoration (not pictured)
0-6/0-8 mm Tan Color Leather (not pictured)



Sketch


Waist Straps - 90% complete

Going into Project - Asami Yamazaki , the waist strap accessory was always going to pose the most interesting aspect of what was required.
One area I studied over and over was the black rubber section at the rear. In the end I figured out what was going on and the shape required.

It made sense to draw the shape using Photoshop. I printed it out, glued it on to a piece of 1mm black rubber and set about cutting out the shape.
The first shape was 20% too large. Using Photoshop the problem was fixed by resizing the image to 80%

The slots proved difficult to cut out.
In all, it took me 4 attempts to get the shape cut out correct.

I never thought for one minute 1/6th scale snap hooks exited.
Searching on ebay, I spotted an Action Man Ger Parachute complete with snap hooks.
They are not 100% accurate, but they will do.

The size (height) of the snap hooks dictated to some degree the size of the black rubber shape.

Much time was spent searching for micro metal ‘D’ rings. To begin with I settled for some plastic ‘D’ rings, that were on the same Parachute as the snap clips.
As luck would have it, I spotted on ebay Action Man Bread Bag, which featured 4x small metal ‘D’ clips. Perfect!

The 3x beige colored strips that wrap around the waist appear to be made from rubber. I did consider rubber bands. In the end I decided to use tan leather, as I had some and the same leather was used on the apron and arm straps. Plus, the tan color looks good.

Finally, the time came to assemble all the above, mostly using glue, some cotton.
The result was place against the back of the Phicen body, and the size looks about right. I had feared it might be too wide.

I will add the waist straps to the Figure once I have added the rivets (which I am still waiting to arrive).

Really nice job on the straps. I applaud your attention to detail.

Stryker2011 wrote:Really nice job on the straps. I applaud your attention to detail.

Thanks.
At first i thought this part would throw a spanner in the works.
Finding those snap clips made all the difference.

(cont.)


Sketch

Just found this from a couple of weeks ago.
It was created to help with the handle design, arm straps.
Also, it served as a reminder to piece the left ear of the portrait twice.
So far i have failed to work out if it is a small diamond stud or metal stud in the ear?

(cont.)


Materials - 12mm Black Shrink Wrap Tube

The 12mm black shrink wrap tube arrived today.

Good news: 12mm is perfect
Bad news: the tube is not soft enough

..back to the drawing board.

I started to think the best route might be to return to the cutting up of black rubber gloves and gluing them rather than stitching them, to form a tube.
The black rubber used on gloves is almost perfect. It would be better if I could find a sheet of the same type of rubber.



Materials - Black Rubber Balloons

These would have been perfect, if only they were wider.



Materials - Black Tube made from Rubber Gloves

This idea almost worked. The stitching creates a awkward line along one edge.
I tried stitching, as i figured gluing would be too difficult.