Topics tagged under draconarius on OneSixthFigures Dbb0110


Introduction

HH and HY have continued their partnership in bringing out new or revived Roman-themed action figures. They started with legionaries, branched out into movie characters, gladiators, and returned to soldiers. One of these is the Dragon Banner Bearer, or, as the Romans would have called him, Draconarius. Mine arrived a few days ago from GianToy and I finally got around to taking a few photos the other day and writing up a quick review. I am no completist when it comes to these sets, especially as a function of space and costs, although I do often pick up parted out parts from the sets I do not buy as such. In this instance, I decided this was different enough and cool enough to get the set.

Topics tagged under draconarius on OneSixthFigures Dbb0210

Packaging

The set comes in an attractive shoebox-type container (which ships in its own cardboard shipper), with a lid that pulls open. Everything is safe and collector friendly, except perhaps the two circular pieces of tape used to seal the package shut. Inside are a couple of black foam treys holding the figure and its accessories. It seems to me that one of the defining features of this line of products is that the box size is remarkably different between many (if not all) releases; this one is smaller than most others I have.

Topics tagged under draconarius on OneSixthFigures Dbb0310

Sculpting

There is plenty of sculpted detail in this set, including the human face (see under Paint below), the ornate cavalry "sport" helmet, the greaves, the ornate military belt (cingulum) and hanging straps (baltea), the sword and dagger and their sheaths, the sandaled feet, the shield, and of course the standard's dragon head. The detail varies from reasonably sharp to very sharp, but is generally appropriate for the desired effect. As usual (except for when they go for seamless TBLeague bodies), HH and HY seem to have used a Coo Model body. The figure stands about 12 inches (30.5 cm) without the helmet on.

Topics tagged under draconarius on OneSixthFigures Dbb0410

Paint

The paint application is not the most ambitious but nevertheless generally sharp and precise. As usual, this is least successful on the molded sandaled feet (the only way to get those right is to provide separate sandals, as done by Kaustic Plastik and ACI). The paint application is given a worn, slightly weathered look on the shield, and, together with the delicate sculpting, works very well on the head. The eyes are glossy and sharply executed. Real metal and plastic elements intended to represent metal work well enough side by side. The painted detail on the shield looks realistically hand-made and used over time.

Topics tagged under draconarius on OneSixthFigures Dbb0510

The likeness reminds me of Michael Fassbender's appearance in Centurion.

Topics tagged under draconarius on OneSixthFigures TMZg5KVeTUKVde3kkYpmuc

Articulation

The figure seems to have a very full range of modern action figure articulation, except that the elbows are single-jointed. The body is reasonably stiff and balances well, even with the arms and armor (which include some metal parts). The choice of a type of fabric for (chain) mail helps ensure the articulation is restricted as little as possible.

Topics tagged under draconarius on OneSixthFigures Dbb0610

Accessories

The figure comes with a number of accessories. First, there is the action figure stand, of the typical raised circular base design with a crotch-grabber on the pole. There are three alternative pairs of hands, for a total of four pairs (relaxed, fists, grip, grasp). For weapons, the figure has a sword with a sheath hanging from a baldric, and a dagger with a sheath hanging from the military belt (not visible in this photograph), which is itself arguably an accessory. There is the large curved oval shield, the helmet, the helmet's mask (a separate piece), and the dragon standard, which is made of three pieces: the pole, the dragon head, and the fabric tail attached to the head. The head has to be plugged onto the pole to use the standard. A wire is sewn into the fabric tail, to allow for some posing of the tail. Since the head is metal and apparently not hollow, the standard is not always easy to balance.

Topics tagged under draconarius on OneSixthFigures Dbb0710

Outfit

The true soft goods are the pants, the yellow-spotted red tunic, and the red military scarf (tucked under the armor). The (chain) mail is also made of a sort of fabric, but is intended to portray metal mail armor. There are pleather vambraces and ornate metal greaves. The boots (caligae) are just part of the molded feet. As mentioned above, the outfit does not really restrict the articulation of the figure.

Topics tagged under draconarius on OneSixthFigures Dbb0810

Source Accuracy

As already discovered by Skippy, the main source for this figure is an illustration by Adam Hook in Nic Fields' Roman Auxiliary Cavalryman AD 14-193 (below). The shape of the armor (reinterpreted as (chain) mail), the shield's painted pattern, the pants, boots, dragon standard, tunic, and scarf in the set appear to be accurate to illustration, which depicted more specifically a cavalryman participating in cavalry games (hippika gymnasia). For some reason, the shield's central round boss in the illustration has been replaced by a vertical spine in the set. The helmet does not correspond exactly to those represented in this illustration or elsewhere in the volume, but it is similar enough to some of them, including those in another illustration by Adam Hook, showing cavalrymen in training (also below). The ornate details of the cavalry helmet apart, HH & HY's reiteration has two inaccuracies: the face mask is overly large/long, reaching below the line of the cheekpieces, and it (or the helmet itself) lacks the ear-shaped protectors for the ears. The face mask being held in place with a band instead of attaching to the helmet also does not seem accurate. All in all, I would have preferred a more accurate (or recognizable) helmet, like the one made by Kaustic Plastik some years ago (see the comparison photo below).

As usual, HH & HY could not restrain themselves from adding more items to spruce up the figure. The sword (and perhaps the belt with a dagger) are a sensible enough addition, and can be seen in Adam Hook's training illustration, and in other reconstructions of Roman standard-bearers. As cavalry, however, there should probably have been no hanging strips attached to the belt. The vambraces are common modern fiction when it comes to this type of historical costume (apart from one arm of some archers); the greaves, likewise, at this point they would have been worn only by centurions (if at all) and perhaps as part of the fuller and more ornate panoply of high-ranking officials. One can easily take off the vambraces and the greaves to achieve a more realistic look. I did so for many of the photos, and left them off; on the other hand I did not try removing the hanging strips from the belt. I wish the metal dragon head were hollow and had an open throat: this would have been both accurate and helpful, making it lighter and easier to balance. But visually the dragon head and tail are about right, although the pole is too tall, a common feature with HH & HY's other Roman standards (compare the Aquilifer in the photos below).

Topics tagged under draconarius on OneSixthFigures Dbb0910

Topics tagged under draconarius on OneSixthFigures Dbb1510

Fun Factor

With a bunch of accessories, a small variety of display options, and good articulation, the figure promises to be fun to pose or play with. Moreover, given the other Roman military figures produced by HH & HY (and others), it would have plenty of potential company in a diorama or on a shelf. It also helps that there are no serious functional issues with it. His buddy below is the HH & HY Eagle Flag Bearer (i.e., Aquilifer).

Topics tagged under draconarius on OneSixthFigures Dbb1010

Value

At $220 (USD), with free shipping, this is not a cheap set, but it is also quite far from the much heftier prices demanded for sets that are not considerably better in quality or in the quantity of items they deliver. And this set delivers a reasonable lot. Unlike a legionary, moreover, this is easily a figure of which one would probably not need a second one. This is of course, supposing you can find the set at this price. Even reputable outlets are selling them at a higher price point.

Topics tagged under draconarius on OneSixthFigures Dbb1110


Things to watch out for

Nothing or little. I would be gentle with the belt and its hanging strips. The only thing that came apart for me was the attachment of the baldric to the sword's scabbard at one end, but it was easily rectified. There are certainly no tiny or exceedingly fragile elements in this set.

Topics tagged under draconarius on OneSixthFigures Dbb1210

Overall

Is this the most exciting Roman (or non-Roman) action figure? Surely not. But it is very well made, functional, versatile, plays well with others, and it is also different from what we normally see among Roman-themed products (unless I've missed an earlier version -- HH & HY have been revisiting some other companies' figures). It seemed worthwhile to me, and I don't regret it.

Topics tagged under draconarius on OneSixthFigures Dbb1310

Where to buy

I got mine at GianToy, for $220.

Big Bad Toy Store has it for $245.

Black Ops Toys has it for $350.

Cotswold Collectibles has it for $240.

Monkey Depot has it for $240.

Timewalker Toys has it for $240.

Topics tagged under draconarius on OneSixthFigures Dbb1410

Other recent reviews

ADD Toys King of Khalasar

World Box AT030 Body

Hot Toys Star Wars Rogue One Assault Tank Commander

Hot Toys Star Wars Rogue One Director Krennic

Premier Toys PT0001 Wasteland Gladiator

Toys Headquarters Vol 003 Fighter

TBLeague Ramesses the Great

Figure Masters Vamp Lou

LDDoll Seamless Figure Body

SooSoo Toys Frozen Man

SooSoo Toys Mr Butcher

Sideshow and Hot Toys Star Wars Scout Troopers (comparison)

Thunder Toys Hell Detective

Hot Toys Star Wars Emperor Palpatine

TBLeague Barbarian Soul

Hot Toys Star Wars Return of the Jedi Stormtrooper

ADD Toys War Wolves Back (muscle version)

World Box AT027 body

Hot Toys Star Wars Solo Mudtrooper

Sideshow Star Wars TIE Fighter Pilot

Woo Toys WO-004 Fat Thor

HH HY Rome Infantry

HH HY Rome Centurion

Mr Toys Barbarian Set B (He-Man)

Mr Toys Barbarian Set B (Conan the Barbarian)

Dragon and TBLeague Alexander the Great (comparison)

Kautic Plastik Roman Infantry 2019

JX Toys Peggy Carter

TBLeague 1:12 seamless male bodies

Hasbro Star Wars Rogue One Imperial Combat Assault Tank

Hasbro Star Wars imperials 2019

Hasbro Star Wars Jabba's Tatooine Skiff

CC Toys Unexplored Nate (summer version)

Jiaou Doll Boss Chair

Hot Toys Star Wars Solo Patrol Trooper

China Toys Teutonic Knight

Star Ace 300 Queen Gorgo

Black Box Toys Spectre Girl (Madeleine Swann)

Hot Toys Star Wars Royal Guard

VS Toys Bathroom

Coomodel Vikings Vanquisher Viking Ship

Coomodel Vikings Vanquisher Valhalla (double set)

TBLeague M36 body

Chinese wooden chairs and table sets A and B

HY Toys Armchair

TBLeague M35 body

Sideshow Jack Burton

Disney Star Wars Director Orson Krennic

TBLeague Spartan Goddess of War

AR Toys Hellman

Dragon Men in Black 3 Agent K 1969

Topics tagged under draconarius on OneSixthFigures Dbb1610

I hope this has been useful. As always, what do you think?

#hhmodel #haoyutoys #rome #dragonbannerbearer #draconarius #military #historical #male
Search in: GENERAL TALK  Topic: HH Model & Haoyu Toys Dragon Banner Bearer review  Replies: 10  Views: 1348